CC2510FX Datasheet, PDF (81/253 Pages) List of Unclassifed Manufacturers – True System-on-Chip with Low Power RF Transceiver and 8051 MCU

CC2510Fx / CC2511Fx
P0IFG (0x89) – Port 0 Interrupt Status Flag
CC2510Fx:
Bit Name
7:0 _P0IF[7:0]
Reset
0x00
R/W
R/W0
Description
Port 0, inputs 7 to 0 interrupt status flags. When an input port pin
has an interrupt request pending, the corresponding flag bit will be
set.
CC2511Fx:
Bit Name
7 _{USB_RESUME}
6_-
5:0 _P0IF[5:0]
Reset
0
0
0x00
R/W
R/W0
R0
R/W0
Description
USB Resume detected during suspend.
Not used
Port 0, inputs 7 to 0 interrupt status flags. When an input port pin
has an interrupt request pending, the corresponding flag bit will be
set.
P1IFG (0x8A) – Port 1 Interrupt Status Flag
Bit Name
7:0 _P1IF[7:0]
Reset
0x00
R/W
R/W0
Description
Port 1, inputs 7 to 0 interrupt status flags. When an input port pin
has an interrupt request pending, the corresponding flag bit will be
set.
P2IFG (0x8B) – Port 2 Interrupt Status Flag
Bit Name
7:5 _-
4:0 _P2IF[4:0]
Reset
000
0x00
R/W
R0
R/W0
Description
Not used.
Port 2, inputs 4 to 0 interrupt status flags. When an input port pin
has an interrupt request pending, the corresponding flag bit will be
set.
CC2510Fx/CC2511Fx PRELIMINARY Data Sheet (Rev. 1.2) SWRS055A Page 81 of 252