ATMEGA8_14 Datasheet, PDF (242/331 Pages) ATMEL Corporation – High-performance, Low-power Atmel

ATmega8(L)
Electrical Characteristics – TA = -40°C to 105°C
Note: Typical values contained in this data sheet are based on simulations and characterization of other AVR microcontrollers manu-
factured on the same process technology. Min and Max values will be available after the device is characterized.
Absolute Maximum Ratings*
Operating Temperature.................................. -55C to +125C
Storage Temperature ..................................... -65°C to +150°C
Voltage on any Pin except RESET
with respect to Ground ................................-0.5V to V_CC+0.5V
Voltage on RESET with respect to Ground......-0.5V to +13.0V
Maximum Operating Voltage ............................................ 6.0V
*NOTICE:
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent dam-
age to the device. This is a stress rating only and
functional operation of the device at these or
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect
device reliability.
DC Current per I/O Pin ............................................... 40.0 mA
DC Current V_CC and GND Pins................................ 200.0 mA
DC Characteristics
T_A = -40C to 105C, V_CC = 2.7V to 5.5V (unless otherwise noted)
Symbol Parameter
Condition
V_IL
Input Low Voltage
V_IL1
Input Low Voltage
V_IH
Input High Voltage
V_IH1
Input High Voltage
V_IH2
Input High Voltage
V_OL
Output Low Voltage⁽³⁾
(Ports A,B,C,D)
V_OH
Output High Voltage⁽⁴⁾
(Ports A,B,C,D)
I_IL
Input Leakage
Current I/O Pin
Except XTAL1 pin
XTAL1 pin, External Clock Selected
Except XTAL1 and RESET pins
XTAL1 pin, External Clock Selected
RESET pin
I_OL = 20 mA, V_CC = 5V
I_OL = 10 mA, V_CC = 3V
I_OH = -20 mA, V_CC = 5V
I_OH = -10 mA, V_CC = 3V
Vcc = 5.5V, pin low
(absolute value)
I_IH
Input Leakage
Current I/O Pin
Vcc = 5.5V, pin high
(absolute value)
R_RST
R_pu
Reset Pull-up Resistor
I/O Pin Pull-up Resistor
Min
Typ Max
Units
-0.5
-0.5
0.6 V_CC(2)
0.8 V_CC(2)
0.9 V_CC(2)
0.2 V_CC(1) V
0.1 V_CC(1) V
V_CC + 0.5 V
V_CC + 0.5 V
V_CC + 0.5 V
0.8
V
0.6
V
4.0
V
2.2
V
3
µA
3
µA
30
80
k
20
50
k
2486AA–AVR–02/2013
242