EPF8452ATC100-4N Datasheet, PDF (29/62 Pages) Altera Corporation – Programmable Logic Device Family

FLEX 8000 Programmable Logic Device Family Data Sheet
Table 12. FLEX 8000 5.0-V Device Capacitance Note (8)
Symbol
Parameter
Conditions
Min
Max Unit
C _IN
C _OUT
Input capacitance
Output capacitance
V_IN = 0 V, f = 1.0 MHz
V_OUT = 0 V, f = 1.0 MHz
10
pF
10
pF
Notes to tables:
(1) See the Operating Requirements for Altera Devices Data Sheet.
(2) Minimum DC input is –0.5 V. During transitions, the inputs may undershoot to –2.0 V or overshoot to 7.0 V for input
currents less than 100 mA and periods shorter than 20 ns.
(3) The maximum V _CC rise time is 100 ms.
(4) Numbers in parentheses are for industrial-temperature-range devices.
(5) Typical values are for T _A = 25° C and V_CC = 5.0 V.
(6) These values are specified in Table 10 on page 28.
(7) The I_OH parameter refers to high-level TTL or CMOS output current; the I_OL parameter refers to low-level TTL or
CMOS output current.
(8) Capacitance is sample-tested only.
Tables 13 through 16 provide information on absolute maximum ratings,
recommended operating conditions, operating conditions, and
capacitance for 3.3-V FLEX 8000 devices.
3
Table 13. FLEX 8000 3.3-V Device Absolute Maximum Ratings Note (1)
Symbol
Parameter
V _CC
V_I
I _OUT
T _STG
T _AMB
T_J
Supply voltage
DC input voltage
DC output current, per pin
Storage temperature
Ambient temperature
Junction temperature
Conditions
With respect to ground (2)
No bias
Under bias
Plastic packages, under bias
Min
–2.0
–2.0
–25
–65
–65
Max Unit
5.3
V
5.3
V
25
mA
150
°C
135
°C
135
°C
Table 14. FLEX 8000 3.3-V Device Recommended Operating Conditions
Symbol
Parameter
V_CC Supply voltage
V_I
Input voltage
V_O
Output voltage
T_A
Operating temperature
t_R
Input rise time
t_F
Input fall time
Conditions
(3)
For commercial use
Min
Max Unit
3.0
–0.3
0
0
3.6
V
V_CC + 0.3 V
V _CC
V
70
°C
40
ns
40
ns
Altera Corporation
29