AK5366VR Datasheet, PDF (8/42 Pages) Asahi Kasei Microsystems – 24-Bit 48kHz ΔΣ ADC with Selector/PGA/ALC

ASAHI KASEI
[AK5366VR]
ABSOLUTE MAXIMUM RATINGS
(AVSS, DVSS=0V; Note 1
Parameter
Symbol
min
max
Units
Power Supplies:
Analog
AVDD
−0.3
6.0
V
Digital
DVDD
−0.3
6.0
V
Input Buffer
(Note 2) TVDD
−0.3
6.0
V
|AVSS – DVSS|
(Note 3) ∆GND
-
0.3
V
Input Current, Any Pin Except Supplies
IIN
-
±10
mA
Analog Input Voltage
(Note 4)
(LIN1-5, RIN1-5, LOPIN, ROPIN, IPGAL, IPGAR, M/S pins)
VINA
−0.3
AVDD+0.3 V
Digital Input Voltage 1
(MCLK, BICK, LRCK, PDN pins)
VIND1
−0.3
DVDD+0.3 V
Digital Input Voltage 2
(SMUTE, SEL2-0, CSN/CAD1, CCLK/SCL, CDTI/SDA,
VIND2
−0.3
TVDD+0.3 V
I2C pins)
Ambient Temperature (Powered applied)
Ta
−40
85
°C
Storage Temperature
Tstg
−65
150
°C
Note 1. All voltages with respect to ground.
Note 2. SMUTE, SEL2-0, CSN/CAD1, CCLK/SCL, CDTI/SDA and I2C pins correspond to 5V tolerant.
Note 3. AVSS and DVSS must be connected to the same analog ground plane.
Note 4. M/S pin is the digital input pin. However, M/S pin should be connected to AVDD or AVSS to prevent the noise
to the analog input pins
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
RECOMMENDED OPERATING CONDITIONS
(AVSS, DVSS=0V; Note 1)
Parameter
Symbol
min
typ
Power Supplies
(Note 5)
Analog
Digital
Input Buffer
AVDD
DVDD
TVDD
4.75
5.0
3.0
3.3
DVDD
5.0
Note 1. All voltages with respect to ground.
Note 5. The power up sequence between AVDD, DVDD and TVDD is not critical.
max
5.25
AVDD
AVDD
Units
V
V
V
WARNING: AKM assumes no responsibility for the usage beyond the conditions in this datasheet.
MS0526-E-00
-8-
2006/07