DS810 Datasheet, PDF (13/21 Pages) Xilinx, Inc – LogiCORE IP ChipScope AXI

LogiCORE IP ChipScope AXI Monitor (v3.05.a)
Table 2: Design Parameters (Cont’d)
Feature Description
Parameter Name
Auxiliary Protocol Checks
Enable (Trigger
PC_ERROR_AUXILLARY_OR
)
C_MON_AXI_EN_AUX_CHECKS
ARM Recommended Max Wait
Protocol Checks Enable
(Trigger
PC_ERROR_ARM_REC_WAI
T_OR)
C_MON_AXI_EN_ARM_REC_
WAIT_CHECKS
ARM Recommended Protocol
Checks Enable (Trigger
PC_ERROR_ARM_REC_OR)
C_MON_AXI_EN_ARM_REC_
ONLY_CHECKS
Size of FIFO for Storing
Outstanding Read Bursts
C_MON_AXI_PC_MAXRBURST
Size of FIFO for Storing
Outstanding Read Bursts
C_MON_AXI_PC_MAXWBURST
Width of Exclusive Access
Monitor
C_MON_AXI_PC_EXMON_WIDTH
Allowable Values
(0,1)
(0,1)
(0,1)
(2:32)
(2:32)
(1:32)
Default
Values
Type
0
integer
0
integer
0
integer
16
integer
16
integer
1
integer
Notes:
1. These parameters are set by the XPS tool automatically after the ChipScope AXI Monitor is connected to another Xilinx AXI IP
core. If any port(s) for which these parameters set the width are not used, retain the default widths and the XPS tool will ground the
port(s). Do not enter a value of 0 in the MHS file to disable the default value.
AXI Protocol Checks and Descriptions
The AXI Protocol Checks are listed and described in Table 3.
Table 3: AXI Protocol Checks and Descriptions
Name of Protocol Check
Enabling Parameter
AXI4_ERRM_AWADDR_STABLE
C_AXI_PC_EN_HANDSHAKE_CHECKS
AXI4_ERRM_AWBURST_STABLE
C_AXI_PC_EN_HANDSHAKE_CHECKS
AXI4_ERRM_AWCACHE_STABLE
AXI4_ERRM_AWID_
STABLE
AXI4_ERRM_AWLEN_
STABLE
AXI4_ERRM_AWLOCK_
STABLE
AXI4_ERRM_AWPROT_STABLE
AXI4_ERRM_AWSIZE_
STABLE
AXI4_ERRM_AWQOS_
STABLE
C_AXI_PC_EN_HANDSHAKE_CHECKS
C_AXI_PC_EN_HANDSHAKE_CHECKS
C_AXI_PC_EN_HANDSHAKE_CHECKS
C_AXI_PC_EN_HANDSHAKE_CHECKS
C_AXI_PC_EN_HANDSHAKE_CHECKS
C_AXI_PC_EN_HANDSHAKE_CHECKS
C_AXI_PC_EN_HANDSHAKE_CHECKS
Description
AWADDR must remain stable when
AWVALID is asserted and AWREADY low
AWBURST must remain stable when
AWVALID is asserted and AWREADY low
AWCACHE must remain stable when
AWVALID is asserted and AWREADY low
AWID must remain stable when AWVALID is
asserted and AWREADY low
AWLEN must remain stable when AWVALID
is asserted and AWREADY low
AWLOCK must remain stable when
AWVALID is asserted and AWREADY low
AWPROT must remain stable when
AWVALID is asserted and AWREADY low
AWSIZE must remain stable when
AWVALID is asserted and AWREADY low
AWQOS must remain stable when
AWVALID is asserted and AWREADY low
DS810 July 25, 2012
www.xilinx.com
13
Product Specification