LM3S6753 Datasheet, PDF (88/625 Pages) Texas Instruments – Stellaris LM3S6753 Microcontroller

System Control
Register 8: Run-Mode Clock Configuration (RCC), offset 0x060
This register is defined to provide source control and frequency speed.
Run-Mode Clock Configuration (RCC)
Base 0x400F.E000
Offset 0x060
Type R/W, reset 0x078E.3AD1
31
30
29
28
27
26
reserved
ACG
Type RO
RO
RO
RO
R/W
R/W
Reset
0
0
0
0
0
1
Type
Reset
15
14
reserved
RO
RO
0
0
13
12
11
10
PWRDN reserved BYPASS reserved
R/W
RO
R/W
RO
1
1
1
0
25
24
SYSDIV
R/W
R/W
1
1
23
22
21
20
19
USESYSDIV reserved USEPWMDIV
R/W
R/W
RO
R/W
R/W
1
0
0
0
1
18
PWMDIV
R/W
1
17
R/W
1
16
reserved
RO
0
9
8
7
6
5
4
XTAL
OSCSRC
R/W
R/W
R/W
R/W
R/W
R/W
1
0
1
1
0
1
3
2
reserved
RO
RO
0
0
1
0
IOSCDIS MOSCDIS
R/W
R/W
0
1
Bit/Field
31:28
27
Name
reserved
ACG
Type
RO
R/W
Reset
0x0
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Auto Clock Gating
This bit specifies whether the system uses the Sleep-Mode Clock
Gating Control (SCGCn) registers and Deep-Sleep-Mode Clock
Gating Control (DCGCn) registers if the controller enters a Sleep or
Deep-Sleep mode (respectively). If set, the SCGCn or DCGCn registers
are used to control the clocks distributed to the peripherals when the
controller is in a sleep mode. Otherwise, the Run-Mode Clock Gating
Control (RCGCn) registers are used when the controller enters a sleep
mode.
The RCGCn registers are always used to control the clocks in Run
mode.
This allows peripherals to consume less power when the controller is
in a sleep mode and the peripheral is unused.
88
April 05, 2010
Texas Instruments-Production Data