LM3S6753 Datasheet, PDF (571/625 Pages) Texas Instruments – Stellaris LM3S6753 Microcontroller

Stellaris® LM3S6753 Microcontroller
Table 21-7. Signals by Function, Except for GPIO (continued)
Function
Pin Name Pin Number Pin Type Buffer Type^a
Description
Hibernate
HIB
M12
O
OD
An open-drain output with internal pull-up that
indicates the processor is in Hibernate mode.
VBAT
L12
-
Power Power source for the Hibernation module. It is
normally connected to the positive terminal of a
battery and serves as the battery
backup/Hibernation module power-source supply.
WAKE
M10
I
TTL
An external input that brings the processor out of
Hibernate mode when asserted.
XOSC0
K11
I
Analog Hibernation module oscillator crystal input or an
external clock reference input. Note that this is
either a 4.194304-MHz crystal or a 32.768-kHz
oscillator for the Hibernation module RTC. See the
CLKSEL bit in the HIBCTL register.
XOSC1
K12
O
Analog Hibernation module oscillator crystal output. Leave
unconnected when using a single-ended clock
source.
I2C
I2C0SCL
C11
I/O
OD
I²C module 0 clock.
I2C0SDA
C12
I/O
OD
I²C module 0 data.
JTAG/SWD/SWO
SWCLK
A9
I
TTL
JTAG/SWD CLK.
SWDIO
B9
I/O
TTL
JTAG TMS and SWDIO.
SWO
A10
O
TTL
JTAG TDO and SWO.
TCK
A9
I
TTL
JTAG/SWD CLK.
TDI
B8
I
TTL
JTAG TDI.
TDO
A10
O
TTL
JTAG TDO and SWO.
TMS
B9
I/O
TTL
JTAG TMS and SWDIO.
TRST
A8
I
TTL
JTAG TRST.
PWM
Fault
F2
I
TTL
PWM Fault.
PWM0
M9
O
TTL
PWM 0. This signal is controlled by PWM Generator
0.
PWM1
G2
O
TTL
PWM 1. This signal is controlled by PWM Generator
0.
PWM2
E12
O
TTL
PWM 2. This signal is controlled by PWM Generator
1.
PWM3
D12
O
TTL
PWM 3. This signal is controlled by PWM Generator
1.
PWM4
A11
O
TTL
PWM 4. This signal is controlled by PWM Generator
2.
PWM5
B12
O
TTL
PWM 5. This signal is controlled by PWM Generator
2.
April 05, 2010
571
Texas Instruments-Production Data