LSM303AH Datasheet, PDF (67/82 Pages) –

LSM303AH
Register description
TILT_INT
Table 90. FUNC_CK_GATE_A register description
Tilt event detection status.
(0: tilt event not detected; 1: tilt event detected)
FS_
SRC [1:0]
Full-scale SRC bit.
(00: Same as CTRL1_A (20h) - no scaling;
01: 2 g;
10: 4 g;
11: same as CTRL1_A (20h) - no scaling)
SIGN_MOT_
DETECT
Significant motion event detection status.
(0: significant motion event not detected; 1: significant motion event detected)
RST_SIGN
MOT
Significant motion initialization reset.
(0: disabled; 1: pedometer significant motion initialization has to be executed at
the next routine execution or is actually ongoing)
RST_PEDO
Pedometer reset.
(0: disabled; 1: indicates that pedometer step counter initialization has to be
executed at the next routine execution or is actually ongoing)
STEP_DETECT Step detection status.
(0: Step not detected; 1: Step detected)
CK_GATE_
FUNC
Function clocking gate signal.
(0: Power down; 1: FUNC is in power mode)
8.33
FUNC_SRC_A (3Eh)
Functional source register (r)
Table 91. FUNC_SRC_A register
-
-
-
-
-
RST_TILT
MODULE_
READY
-
RST_TILT
MODULE_READY
Table 92. FUNC_SRC_A register description
Tilt reset.
(0: disabled; 1: indicates that tilt initialization has to be executed at the
next routine execution or is actually ongoing)
Module status.
(0: new module data not available, 1: new module data available)
DocID027766 Rev 6
67/82
82