|
LSM303AH Datasheet, PDF (14/82 Pages) – | |||
|
◁ |
Module specifications
LSM303AH
2. Sensitivity calculated at 16-bit.
3. Measurements are performed in a uniform temperature setup and they are based on characterization data in a limited
number of samples, not measured during final test for production.
4. Typical zero-g level offset value after MSL3 preconditioning.
5. Offset can be eliminated by enabling the slope filter.
6. Based on characterization data on a limited number of samples, not measured during final test for production.
7. Excluding drift due to magnetic shock.
8. With low-pass filter or offset cancellation enabled.
9. âSelf-test positive differenceâ is defined as: OUTPUT[mg](CTRL3 ST2, ST1 bits=01) - OUTPUT[mg](CTRL3 ST2, ST1 bits=00).
10. Magnetic âself-testâ is defined as OUTPUT[gauss](self-test enabled) - OUTPUT[gauss](self-test disabled).
14/82
DocID027766 Rev 6
|
▷ |