LSM303AH Datasheet, PDF (54/82 Pages) –

Register description
ST2
0
0
1
1
LSM303AH
Table 40. Self-test mode selection
ST1
Self-test mode
0
Normal mode
1
Positive sign self-test
0
Negative sign self-test
1
Not allowed
8.6
CTRL4_A (23h)
Control register 4 (r/w): interrupt 1 configuration
Table 41. CTRL4_A register
0⁽¹⁾
INT1_S_
TAP
INT1_WU INT1_FF INT1_TAP INT1_6D INT1_FTH INT1_DRDY
1. This bit must be set to '0' for correct device operation.
Table 42. CTRL4_A register description
INT1_S_TAP Single-tap recognition is routed on INT1 pad. Default value: 0
(0: disabled; 1: enabled)
INT1_WU
Wakeup recognition is routed on INT1 pad. Default value: 0
(0: disabled; 1: enabled)
INT1_FF
Free-fall recognition is routed on INT1 pad. Default value: 0
(0: disabled; 1: enabled)
INT1_TAP
Double-tap recognition is routed on INT1 pad. Default value: 0
(0: disabled; 1: enabled)
INT1_6D
6D recognition is routed on INT1 pad. Default value: 0
(0: disabled; 1: enabled)
INT1_FTH
FIFO threshold interrupt is routed on INT1 pad. Default value: 0
(0: disabled; 1: enabled)
INT1_DRDY Data-Ready is routed on INT1 pad. Default value: 0
(0: disabled; 1: enabled)
54/82
DocID027766 Rev 6