LSM303AH Datasheet, PDF (55/82 Pages) –

LSM303AH
Register description
8.7
CTRL5_A (24h)
Control register 5 (r/w): interrupt 2 configuration
DRDY_
PULSED
INT2_
BOOT
Table 43. CTRL5_A register
INT2_ INT2_ INT2_ INT2_
ON_INT1 TILT SIG_MOT STEP
INT2_
FTH
INT2_
DRDY
DRDY_
PULSED
Table 44. CTRL5_A register description
Data-ready interrupt mode selection: latched mode / pulsed mode. Default value: 0
(0: latched mode; 1: pulsed mode for data-ready)
INT2 _BOOT Boot state routed on INT2 pad. Default value: 0
(0: disabled; 1: enabled)
INT2 _ON INT1 All signals routed on INT2 are also routed on INT1. Default value: 0
(0: disabled; 1: enabled)
INT2 _TILT
Tilt event is routed on INT2 pad. Default value: 0
(0: disabled; 1: enabled)
INT2 _SIG_
MOT
Significant motion detection is routed on INT2 pad. Default value: 0
(0: disabled; 1: enabled)
INT2 _
STEP
Step detection is routed on INT2 pad. Default value: 0
(0: disabled; 1: enabled)
INT2_FTH
FIFO threshold interrupt is routed on INT2 pad. Default value: 0
(0: disabled; 1: enabled)
INT2_DRDY
Data-Ready is routed on INT2 pad. Default value: 0
(0: disabled; 1: enabled)
DocID027766 Rev 6
55/82
82