M16C63 Datasheet, PDF (84/115 Pages) Renesas Technology Corp – RENESAS MCU

M16C/63 Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 3 V
Table 5.41 Electrical Characteristics (2) ⁽¹⁾
V_CC1 = V_CC2 = 2.7 to 3.3 V, V_SS = 0 V at T_opr = −20 to 85°C/−40 to 85°C, f_(BCLK) = 20 MHz unless otherwise
specified.
Symbol
Parameter
Measuring Condition
Standard
Unit
Min. Typ. Max.
I_IL
Low input P0_0 to P0_7, P1_0 to P1_7,
current P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7,
P8_0 to P8_7, P9_0 to P9_7,
P10_0 to P10_7
XIN, RESET, CNVSS, BYTE
V_I = 0 V
−4.0 μA
R_PULLUP Pull-up P0_0 to P0_7, P1_0 to P1_7,
resistance P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_2 to P7_7,
P8_0 to P8_4, P8_6, P8_7,
P9_0 to P9_7, P10_0 to P10_7
V_I = 0 V
50 100 500 kΩ
R_fXIN
R_fXCIN
V_RAM
Feedback resistance XIN
Feedback resistance XCIN
RAM retention voltage
In stop mode
0.8
MΩ
8
MΩ
1.8
V
Note:
1. When V_CC1 ≠ V_CC2, refer to 5 V, 3 V, or 1.8 V standard depending on the voltage.
REJ03B0271-0100 Rev.1.00 Sep 15, 2009
Page 84 of 113