M16C63 Datasheet, PDF (3/115 Pages) Renesas Technology Corp – RENESAS MCU

M16C/63 Group
1. Overview
Table 1.2 Specifications for the 100-Pin Package (2/2)
Item
Function
Description
Timer A
16-bit timer × 5
Timer mode, event counter mode, one-shot timer mode, pulse width
modulation (PWM) mode
Event counter two-phase pulse signal processing (two-phase encoder
input) × 3
Programmable output mode × 3
Timer B
16-bit timer × 6
Timer mode, event counter mode, pulse period measurement mode,
pulse width measurement mode
Timers
Three-phase motor control
timer functions
Real-time clock
• Three-phase inverter control (timer A1, timer A2, timer A4, timer B2)
• On-chip dead time timer
• Count: second, minute, hour, day of the week, month, year
• Periodic interrupt: 0.25 s, 0.5 s
• Automatic correction function
PWM function
8 bits × 2
Remote control signal receiver
• 2 circuits
• 4 wave pattern matchings (differentiate wave pattern for headers, data
0, data 1, and special data)
• 6-byte receive buffer (1 circuit only)
• Operating frequency of 32 kHz
Serial
Interface
UART0 to UART2, UART5 to
UART7
SI/O3, SI/O4
Clock synchronous/asynchronous × 6 channels
I²C-bus, IEBus ⁽¹⁾, special mode 2
SIM (UART2)
Clock synchronization only × 2 channels
Multi-master I²C-bus Interface
1 channel
CEC Functions ⁽³⁾
CEC transmit/receive, arbitration lost detection, ACK automatic output,
operation frequency of 32 kHz
A/D Converter
10-bit resolution × 26 channels, including sample and hold function
Conversion time: 2.15 µs
D/A Converter
8-bit resolution × 2 circuits
CRC Calculator
CRC-CCITT (X¹⁶ + X¹² + X⁵ + 1),
CRC-16 (X¹⁶ + X¹⁵ + X² + 1) compliant
Flash Memory
• Erase/write power supply voltage: 2.7 to 5.5 V
• Erase/write cycles: 1,000 times (program ROM 1, program ROM 2),
10,000 times (data flash)
• Program security: ROM code protect, ID code check
Debug Functions
On-chip debug, on-board flash rewrite, address match interrupt × 4
Operation Frequency/Supply Voltage
5 MHz/VCC1 = 1.8 to 5.5 V, VCC2 = 1.8 V to VCC1
20 MHz/VCC1 = 2.7 to 5.5 V, VCC2 = 2.7 V to VCC1
Current Consumption
Described in 5. “Electrical Characteristics”
Operating Temperature
-20°C to 85°C, -40°C to 85°C ⁽²⁾
Package
100-pin QFP: PRQP0100JD-B (Previous package code: 100P6F-A)
100-pin LQFP: PLQP0100KB-A (Previous package code: 100P6Q-A)
100-pin LGA: PTLG0100KA-A (Previous package code: 100F0M)
Notes:
1. IEBus is a registered trademark of NEC Electronics Corporation.
2. See Table 1.5 “Product List” for the operating temperature.
3. The CEC function indicates circuitry which supports the transmission and reception of CEC signals standardized
by the High-Definition Multimedia Interface (HDMI). HDMI and High-Definition Multimedia Interface are
registered trademarks of HDMI Licensing, LLC.
REJ03B0271-0100 Rev.1.00 Sep 15, 2009
Page 3 of 113