M16C63 Datasheet, PDF (62/115 Pages) Renesas Technology Corp – RENESAS MCU

M16C/63 Group
5. Electrical Characteristics
5.2 Electrical Characteristics (V_CC1 = V_CC2 = 5 V)
5.2.1 Electrical Characteristics
V_CC1 = V_CC2 = 5 V
Table 5.19 Electrical Characteristics (1) ⁽¹⁾
V_CC1 = V_CC2 = 4.2 to 5.5 V, V_SS = 0 V at T_opr = −20 to 85°C/−40 to 85°C, f_(BCLK) = 20 MHz unless otherwise specified.
Symbol
Parameter
Measuring
Condition
Standard
Unit
Min. Typ. Max.
V_OH High output P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, I_OH = −5 mA
voltage P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
V_CC1 − 2.0
V_CC1 V
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, I_OH = −5 mA
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7
V_CC2 − 2.0
V_CC2
V_OH High output P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4, I_OH = −200 μA V_CC1 − 0.3
voltage P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
V_CC1 V
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, I_OH = −200 μA
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7
V_CC2 − 0.3
V_CC2
V_OH High output voltage XOUT
HIGHPOWER
I_OH = −1 mA
V_CC1 − 2.0
V_CC1 V
LOWPOWER
I_OH = −0.5 mA V_CC1 − 2.0
V_CC1
High output voltage XCOUT
With no load
applied
1.5
V
V_OL Low output P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, I_OL = 5 mA
voltage P9_0 to P9_7, P10_0 to P10_7
2.0 V
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, I_OL = 5 mA
2.0
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7
V_OL Low output P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, I_OL = 200 μA
voltage P9_0 to P9_7, P10_0 to P10_7
0.45 V
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, I_OL = 200 μA
0.45
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7
V_OL Low output voltage XOUT
HIGHPOWER
I_OL = 1 mA
2.0 V
LOWPOWER
I_OL = 0.5 mA
2.0
Low output voltage XCOUT
With no load
applied
0
V
Note:
1. When V_CC1 ≠ V_CC2, refer to 5 V, 3 V, or 1.8 V standard depending on the voltage.
REJ03B0271-0100 Rev.1.00 Sep 15, 2009
Page 62 of 113