|
RX630_15 Datasheet, PDF (6/156 Pages) Renesas Technology Corp – Renesas MCUs | |||
|
◁ |
RX630 Group
1. Overview
Table 1.1
Outline of Specifications (5/5)
Classification Module/Function
Description
10-bit A/D converter (ADb)
ï· 1 unit (1 unit à 8 channels)
ï· 10-bit resolution
ï· Conversion time: 1.0 µs per channel (in operation with PCLK at 50 MHz)
ï· Operating mode
Scan mode (single scan mode or continuous scan mode)
External amplifier connection mode
ï· Sample-and-hold function
ï· Three ways to start A/D conversion
Conversion can be started by software, a conversion start trigger from a timer (MTU,
TPU, or TMR), or an external trigger signal.
D/A converter (DAa)
ï· 2 channels
ï· 10-bit resolution
ï· Output voltage: 0 V to VREFH
Temperature sensor
ï· 1 channel
ï· Precision: ± 1 ºC
ï· The voltage of the temperature is converted into a digital value by the 12-bit A/D
converter.
CRC calculator (CRC)
ï· CRC code generation for arbitrary amounts of data in 8-bit units
ï· Select any of three generating polynomials:
X8 + X2 + X + 1, X16 + X15 + X2 + 1, or X16 + X12 + X5 + 1.
ï· Generation of CRC codes for use with LSB-first or MSB-first communications is
selectable
Unique ID
A 16-byte device-specific ID (only for the G version)
Operating frequency
Up to 100 MHz
Power supply voltage
VCC = AVCC0 = VREFH = VCC_USB = 2.7 to 3.6 V, VREFH0 = 2.7 V to AVCC0, Vbatt =
2.3 to 3.6 V
Operating temperature
D version: -40 to +85°C,
G version: -40 to +105°C*1
Package
177-pin TFLGA (PTLG0177KA-A) (in planning)
176-pin LFBGA (PLBG0176GA-A) (in planning)
176-pin LQFP (PLQP0176KB-A)
145-pin TFLGA (PTLG0145KA-A) (in planning)
144-pin LQFP (PLQP0144KA-A)
100-pin TFLGA (PTLG0100KA-A) (in planning)
100-pin LQFP (PLQP0100KB-A)
80-pin LQFP (PLQP0080KB-A) (in planning)
On-chip debugging system
ï· E1 emulator (JTAG and FINE interfaces)
ï· E20 emulator (JTAG interface)
Note 1. Please contact us if you are using a G version.
R01DS0060EJ0160 Rev.1.60
May 19, 2014
Page 6 of 154
|
▷ |