RX630_15 Datasheet, PDF (103/156 Pages) Renesas Technology Corp – Renesas MCUs

RX630 Group
5. Electrical Characteristics
5.2 DC Characteristics
Table 5.2 DC Characteristics (1)
Conditions: VCC = AVCC0 = VREFH = VCC_USB = 2.7 to 3.6 V, VREFH0 = 2.7 V to AVCC0,
VSS = AVSS0 = VREFL/VREFL0 = VSS_USB = 0 V, T_a = T_opr
Item
Symbol
Schmitt trigger
IRQ input pin*¹
V_IH
input voltage
MTU input pin*¹
TMR input pin*¹
V_IL
SCI input pin*¹
V_T
ADTRG# input pin*¹
RES#, NMI
RIIC input pin
V_IH
(except for SMBus)
V_IL
V_T
Ports for 5 V tolerant*²
V_IH
V_IL
Other input pins excluding ports V_IH
for 5 V tolerant*³
V_IL
Input high voltage MD pin, EMLE
V_IH
(except for
Schmitt trigger
EXTAL, RSPI, WAIT#, TCK
input pin)
XCIN*³
D0 to D31
RIIC (SMBus)
Input low voltage MD pin, EMLE
V_IL
(except for
Schmitt trigger
EXTAL, RSPI, WAIT#, TCK
input pin)
XCIN*³
D0 to D31
RIIC (SMBus)
Min.
Typ.
VCC × 0.8 —
–0.3
—
VCC × 0.06 —
VCC × 0.7 —
–0.3
—
VCC × 0.05 —
VCC × 0.8 —
–0.3
—
VCC × 0.8 —
–0.3
—
VCC × 0.9 —
VCC × 0.8 —
VCC × 0.8 —
VCC × 0.7 —
2.1
—
–0.3
—
–0.3
—
–0.3
—
–0.3
—
–0.3
—
Max.
Unit
Test
Conditions
VCC + 0.3 V
VCC × 0.2
—
5.8
VCC × 0.3
—
5.8
VCC × 0.2
VCC + 0.3
VCC × 0.2
VCC + 0.3 V
VCC + 0.3
VCC + 0.3
VCC + 0.3
VCC + 0.3
VCC × 0.1 V
VCC × 0.2
VCC × 0.2
VCC × 0.3
0.8
Note 1.
Note 2.
Note 3.
This does not include the pins, which are multiplexed as ports for 5 V tolerant.
Ports 07, 12 to 17, 20 to 25, 30 to 34, 50 to 52, 54 to 57, 67, 74 to 77, 80 to 82, A1 to A4, A6, B, and C are 5 V tolerant.
For P32, P31, P30, and XCIN, input as follows when the V_BATT power supply is selected.
VIH Min. = V_BATT × 0.8, VIH Max. = V_BATT + 0.3, VIL Min. = –0.3, VIL Max. = V_BATT × 0.2
R01DS0060EJ0160 Rev.1.60
May 19, 2014
Page 103 of 154