English
Language : 

RX113_15 Datasheet, PDF (55/121 Pages) Renesas Technology Corp – Renesas MCUs
RX113 Group
5. Electrical Characteristics
Table 5.4 DC Characteristics (2)
Conditions: VCC = VCC_USB = 1.8 to 2.7 V, AVCC0 = 1.8 to 2.7 V, VSS = AVSS0 = VSS_USB = 0 V, Ta = –40 to +105°C
Item
Symbol
Min.
Typ.
Max.
Unit
Test
Conditions
Schmitt trigger
Ports 16, 17, port A6, port B0
VIH
VCC × 0.8
—
input voltage
(5 V tolerant)
5.8
V
Other pins
Ports 02, 04, 07, ports 10 to 15
ports 20 to 27, ports 30 to 32, 35
ports 50 to 56,
ports A0 to A7
ports B0 to B7
ports C0 to C7
ports D0 to D4
ports E0 to E7
ports F6, F7
port H7, RES#
ports J0, J2, J3*1
VCC × 0.8
—
VCC + 0.3
All pins
VIL
–0.3
—
VCC × 0.2
All pins
∆VT
VCC × 0.01
—
—
Input voltage
MD
VIH
VCC × 0.9
—
VCC + 0.3
V
(except for
Schmitt trigger
XTAL (external clock input)
VCC × 0.8
—
VCC + 0.3
input pins)
Ports 40 to 44, 46, ports J6, J7,
AVCC0 × 0.7
—
AVCC0 + 0.3
ports 90 to 92
MD
XTAL (external clock input)
VIL
–0.3
–0.3
—
VCC × 0.1
—
VCC × 0.2
Ports 40 to 44, 46, ports J6, J7,
ports 90 to 92
–0.3
—
AVCC0 × 0.3
Note 1. There are restrictions on AVCC0 and VCC depending on the usage conditions for the 12-bit D/A converter and I/O ports.
When using ports J0 and J2 multiplexed with DA0 and DA1 as general I/O ports, make sure that VCC ≤ AVCC0.
Table 5.5 DC Characteristics (3)
Conditions: VCC = AVCC0 = VCC_USB = 1.8 to 3.6 V, VSS = AVSS0 = VSS_USB = 0 V, Ta = –40 to +105°C
Input leakage
current
Three-state
leakage current
(off-state)
Item
RES#, MD, port 35
port H7
Ports for 5 V tolerant
Pins other than above
Symbol Min.
Typ.
Max. Unit Test Conditions
Iin
—
—
1.0
µA Vin = 0 V, VCC
ITSI
—
—
1.0
µA Vin = 0 V, 5.8 V
—
—
1.0
Vin = 0 V, VCC
Input capacitance All input pins
Cin
—
—
15
pF Vin = 0 V
(except for port 35, port 16, USB0_DM,
Frequency: 1 MHz
USB0_DP)
Ta = 25°C
Port 35, port 16, USB0_DM, USB0_DP
—
—
30
Table 5.6 DC Characteristics (4)
Conditions: VCC = AVCC0 = VCC_USB = 1.8 to 3.6 V, VSS = AVSS0 = VSS_USB = 0 V, Ta = –40 to +105°C
Item
Symbol Min.
Typ.
Max. Unit Test Conditions
Input pull-up
resistor
All ports
(except for ports 35, PH7)
RU
10
20
100
kΩ Vin = 0 V
R01DS0216EJ0102 Rev.1.02
Dec 01, 2014
Page 55 of 121