RX113_15 Datasheet, PDF (54/121 Pages) Renesas Technology Corp – Renesas MCUs

RX113 Group
5. Electrical Characteristics
5.2 DC Characteristics
Table 5.3 DC Characteristics (1)
Conditions: VCC = VCC_USB = 2.7 to 3.6 V, AVCC0 = 2.7 to 3.6 V, VSS = AVSS0 = VSS_USB = 0 V, T_a = –40 to +105°C
Item
Symbol
Min.
Typ.
Max.
Unit
Test
Conditions
Schmitt trigger
RIIC input pin
V_IH
VCC × 0.7
—
input voltage
(except for SMBus, 5 V tolerant)
5.8
V
Ports 16, 17, port A6, port B0
(5 V tolerant)
VCC × 0.8
—
5.8
Other pins
Ports 02, 04, 07, ports 10 to 15
ports 20 to 27, ports 30 to 32, 35
ports 50 to 56,
ports A0 to A7
ports B0 to B7
ports C0 to C7
ports D0 to D4
ports E0 to E7
ports F6, F7
port H7, RES#
ports J0, J2, J3*¹
VCC × 0.8
—
VCC + 0.3
RIIC input pin (except for SMBus) V_IL
–0.3
Other than RIIC input pin
–0.3
—
VCC × 0.3
—
VCC × 0.2
RIIC input pin (except for SMBus) ∆V_T VCC × 0.05
—
—
Other than RIIC input pin
VCC × 0.1
—
—
Input voltage
MD
V_IH
VCC × 0.9
—
VCC + 0.3
V
(except for
Schmitt trigger
XTAL (external clock input)
VCC × 0.8
—
VCC + 0.3
input pins)
Ports 40 to 44, 46, ports J6, J7,
AVCC0 × 0.7
—
AVCC0 + 0.3
ports 90 to 92
RIIC input pin (SMBus)
2.1
—
VCC + 0.3
MD
XTAL (external clock input)
V_IL
–0.3
–0.3
—
VCC × 0.1
—
VCC × 0.2
Ports 40 to 44, 46, ports J6, J7,
ports 90 to 92
–0.3
—
AVCC0 × 0.3
RIIC input pin (SMBus)
–0.3
—
0.8
Note 1. There are restrictions on AVCC0 and VCC depending on the usage conditions for the 12-bit D/A converter and I/O ports.
When using ports J0 and J2 multiplexed with DA0 and DA1 as general I/O ports, make sure that VCC ≤ AVCC0.
R01DS0216EJ0102 Rev.1.02
Dec 01, 2014
Page 54 of 121