R8CL35A Datasheet, PDF (529/848 Pages) Renesas Technology Corp – RENESAS MCU R8C FAMILY / R8C/Lx SERIES

Under development ^{Preliminary specification}
Specifications in this manual are tentative and subject to change.
R8C/L35A Group, R8C/L36A Group, R8C/L38A Group, R8C/L3AA Group,
R8C/L35B Group, R8C/L36B Group, R8C/L38B Group, R8C/L3AB Group
23. Timer RG
23.9 Notes on Timer RG
23.9.1 Phase Difference, Overlap, and Pulse Width in Phase Counting Mode
The phase difference and overlap between the external input signals from pins TRGCLKA and TRGCLKB
should be 1.5 f1 or more, respectively. The pulse width should be 2.5 f1 or more. Figure 23.22 shows the Phase
Difference, Overlap, and Pulse Width in Phase Counting Mode.
Phase difference
Phase difference
Pulse width
Pulse width
TRGCLKA input
TRGCLKB input
Overlap
Overlap
Phase difference and overlap: 1.5 f1 or more
Pulse width: 2.5 f1 or more
Figure 23.22 Phase Difference, Overlap, and Pulse Width in Phase Counting Mode
REJ09B0441-0010 Rev.0.10 Jul 30, 2008
Page 493 of 809