38K0 Datasheet, PDF (131/133 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

REVISION HISTORY
38K0 GROUP DATA SHEET
Rev.
2.0
2.1
Date
Page
Description
Summary
3/05/02 P. 110 Table 15: Operating temperature is revised.
P. 111
Table 16: Measuring conditions, Power source voltage Vcc and Analog power
source voltage VccE are revised. Analog power source voltage USBVREF
is added.
P. 112
Table 17: Measuring conditions, f(XIN) and Notes 1 and 2 are revised. [f(XIN) or
f(SYN)] and f(φ) are added.
P. 113
Table 18: Measuring conditions and some of VOH, VOL, VT+–VT- and IIL are re-
vised or added.
P. 114 Table 19: The information are revised.
P. 115 Table 20: Measuring conditions and IVREF are revised.
P. 116 to Tables 21 to 25: The information are revised or added.
118
P. 118 Figures 138 and 139 are added.
P. 119 Fig. 140 is revised.
10/09/02 _{P. 1}
FEATURES: USB specification ver.1.1→ Full-Speed USB2.0 specification
Power source voltage: Standard and L version are indicated respectively.
Power dissipation(at 3.3V): 45mW→ 30mW
2. of Notes is deleted.
Fig. 1: Product name of L version is added.
P. 3
Table 1: Vcc and USBREF are revised.
P. 5
Fig. 4: L version is added.
Table 3 is added. Subsequent table numbers are changed.
P. 16 Table 7: Key-on wake up is revised.
P.25
4th line: USB specification ver.1.1→ USB2.0 specification,
Ver1.1→ USB1.1 specification
P. 27
Fig. 25: Tytle: Vcc condition is added. Capacitors are added.
Fig. 26 is added. Subsequent figure numbers are changed.
P. 31 Fig. 30: EP00 transmit/receive byte number register→EP00 byte number register
P. 38 Fig. 44: EP00 transmit/receive byte number register→EP00 byte number register
P. 75
Power source voltage and reset input voltage of Standard and L version are indi-
cated.
Fig. 107:Reset release voltage of Standard and L version are indicated.
P. 81 Table 9: Vcc of Standard and L version are indicated.
P. 94
Table 12:Vcc of Standard and L version are indicated.
I/O of USBVREF: Input → empty, I/O of TrON: Empty → Output
P. 95 Fig.124: Product name of L version is added. Vcc when connect to Vpp is revised.
(2/3)