|
M16C6K7 Datasheet, PDF (112/285 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER | |||
|
◁ |
Rev.1.0
SeCrlioacl kI/Oasynchronous serial I/O (UART) mode
Mitsubishi microcomputers
M16C / 6K7 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Table.GA-7 lists the functions of the input/output pins during UART mode. This table shows the pin functions
_______ _______
when the separate CTS/RTS pins function is not selected. Note that for a period from when the UARTi
operation mode is selected to when transfer starts, the TxDi pin outputs a âHâ. (If the N-channel open-drain
is selected, this pin is in floating state.)
________________
Table.GA-7 Input/output pin functions in UART mode (when CTS/RTS separate function is not selected)
Pin name
Function
Method of selection
TxDi
(P63,P67,P70)
RxDi
(P62,P66,P71)
Serial data output
Serial data input
Corresponding port direction register bit = "0".(Can be used as an input port
when performing transmission only)
CLKi
(P61,P65,P72)
Programmable I/O port
Transfer clock input
Internal/external clock selection bit (bit 3 at address 03A016, 03A816, 037816) = â0â
Internal/external clock selection bit (bit 3 at address 03A016, 03A816) = â1â
Corresponding port direction register bit = â0â (Don't select the external clock
for UART2)
CTSi/RTSi
CTS input
(P60,P64,P73)
CTS/RTS disable bit (bit 4 at address 03A416, 03AC16, 037C16) =â0â
CTS/RTS function selection bit (bit 2 at address 03A416, 03AC16, 037C16) = â0â
Corresponding port direction register bit = â0â
RTS output
CTS/RTS disable bit (bit 4 at address 03A416, 03AC16, 037C16) = â0â
CTS/RTS function selection bit (bit 2 at address 03A416, 03AC16, 037C16) = â1â
Programmable I/O port CTS/RTS disable bit (bit 4 at address 03A416, 03AC16, 037C16) = â1â
111
|
▷ |