CLRC632 Datasheet, PDF (56/163 Pages) NXP Semiconductors – Multiple Protocol Contactless Reader IC

Philips Semiconductors
Multiple Protocol Contactless Reader IC
5.2.5.7 MFOUTSelect Register
Selects internal signal applied to pin MFOUT.
Name: MFOUTSelect
Address: 0x26
Product Specification Rev. 3.0; May 2003
CL RC632
Reset value:00000000, 0x00
7
6
5
4
3
2
1
0
0
0
0
TimeSlot
0
Period
MSB
MFOUTSelect
Access
r/w
r/w
r/w
r/w
r/w
r/w
r/w
r/w
Rights
Description of the bits
Bit
Symbol
Function
7-5
00000
These values shall not be changed
4 TimeSlotPeriod MSB of value TimeSlotPeriod see register 0x25
MSB
3
0
These values shall not be changed
2-0 MFOUTSelect MFOUTSelect defines which signal is routed to pin MFOUT.
000 Constant Low
001 Constant High
010 Modulation Signal (envelope) from internal coder, Miller coded
011 Serial data stream, not Miller coded
100 Output signal of the energy carrier demodulator (card modulation
signal)
Note: only valid MIFARE^® and ISO14443 A at a baudrate of 106
kbaud.
101 Output signal of the subcarrier demodulator (Manchester coded card
signal)
Note: only valid MIFARE^® and ISO14443 A at a baudrate of 106
kbaud.
110 RFU
111 RFU
56
Confidential