|
SAA7385 Datasheet, PDF (3/64 Pages) NXP Semiconductors – Error correction and host interface IC for CD-ROM SEQUOIA | |||
|
◁ |
Philips Semiconductors
Error correction and host interface IC for
CD-ROM (SEQUOIA)
Preliminary speciï¬cation
SAA7385
1 FEATURES
1.1 General
⢠Single chip digital solution for an 8 à speed CD-ROM
controller chip
⢠10 Mbytes/s NCR53CF94 equivalent SCSI controller
included
⢠High-speed 80C32 microcontroller with 256 à 8
scratch-pad SRAM included
⢠High performance CD-ROM interface logic
⢠128 pin QFP package.
1.2 53CF94 SCSI controller
⢠Separate clock input to allow operation up to the
maximum 10 Mbytes/s
⢠Fast synchronous SCSI-2 compatible
⢠24-bit transfer counter for single transfers up to
16 Mbytes
⢠High-speed 16-bit DMA interface to the buffer manager
DRAM
⢠On-chip 48 mA SCSI drivers
⢠Software compatible with members of the 53C90 family
⢠Allows for SCAM support.
1.5 Buffer controller
⢠Ten level arbitration logic
⢠Utilizes low cost 70 ns DRAMs
⢠Page mode DRAM access for high-speed error
correction and SCSI data transfer
⢠Data organization by 3 kbyte frames
⢠256 kbyte or 1 Mbyte DRAM supported.
1.6 Hardware third-level error correction
⢠Third-level correction provides superior performance in
unfavourable conditions
⢠Full hardware error correction to reduce microcontroller
overhead
⢠Corrections are automatically written to the DRAM
frame buffer.
1.7 Additional product support
⢠All control registers mapped into 80C32 special function
memory space
⢠Dedicated S2B interface UART
⢠Input clock synthesizer
⢠Red book audio pass through.
1.3 80C32 high-speed microcontroller
⢠33.87 MHz full system speed operation
⢠Three timers/event counters
⢠Programmable full duplex serial channel
⢠Eight general purpose microcontroller I/O pins
⢠External program ROM.
1.4 Front-end interface logic
⢠Full 8 à speed hardware operation
⢠Block decoder
⢠Sector sequencer
⢠CRC checking of Mode 1 and Mode 2, Form 1 sectors
⢠212 ms watch-dog timer
⢠Sub-code interface with synchronization
⢠C-flag interface for absolute time stamp.
2 GENERAL DESCRIPTION
The SAA7385 is a high integration ASIC that incorporates
all of the digital electronics necessary to connect a CD
decoder to a SCSI host. An 80C32 microcontroller and a
53CF94 SCSI controller are embedded in the ASIC.
The following functions are supported:
⢠Input clock doubler
⢠Block decoder
⢠CRC checking of Mode 1 and Mode 2, Form 1 sectors
⢠Red book audio pass through to SCSI
⢠Buffer manager
⢠Third-level error correction
⢠Sub-code and Q-channel support
⢠Dedicated S2B interface UART
⢠Embedded 80C32 microcontroller
⢠Embedded 53CF94 SCSI controller.
1996 Jun 19
3
|
▷ |