|
AMIS-49587 Datasheet, PDF (40/59 Pages) ON Semiconductor – Power Line Carrier Modem | |||
|
◁ |
AMISâ49587
MA_DATA_Indication (Tag 50h)
Description: The MA_Data_Indication is sent from the AMISâ49587 (Client or Server) to the base micro to deliver the
received DLC frame to the base micro LLC subâlayer.
Syntax:
Initiator
AMISâ49587
Master/Slave
Command (arguments)
MA_Data_Indication (MAC_Frame)
Possible Response
Frame Format :
<STX> Length
< MA_Data_Indication >
MAC_Frame
CHK
See Table 36 Description of the Mac Frame field.
MA_DATA_Indication_Bad_CRC (Tag 53h)
Description: The MA_Data_Indication_Bad_CRC is sent from the AMISâ49587 (Client or Server) to the base micro to
deliver an erroneous received DLC frame to the base micro LLC subâlayer. This command is only used if the Bad CRC
transmitting option is chosen during the configuration (see Sections WriteConfig_Request (Tag 31h) and
WriteConfigNew_Request (Tag 71h))
Syntax:
Initiator
AMISâ49587
Master/Slave
Command (arguments)
MA_Data_Indication_Bad_CRC (MAC_Frame)
Possible Response
Frame Format :
<STX> Length
< MA_Data_Indication_Bad_CRC >
MAC_Frame CHK
Table 36 â Description of the Mac Frame field.
Caution: The Mac Frame transmitted with this command is erroneous. It may be used by the base Micro to try and rebuild
a correct frame (by using the repetitions for example), but is cannot be used just as it is.
REPEATER CALL FUNCTION
ISA_REQUEST (TAG 61H)
Description: In client mode, the ISA_Request command is normally sent by the base micro, when it wants to start a special
sequence named « ISACall ». In server mode, the ISA_Request command is normally sent by the base micro, when it has
received a MA_Data_Indication corresponding with an ISACall indication. The ISA_Request command is sent from the base
micro local LLC subâlayer to the AMISâ49587 local MAC sublayer to switch the AMISâ49587 in special mode called «
ISACall ». This service is an internal service and should not be used. Without correct handling at the system level it can disable
the communication.
Internal Service Request.
Syntax:
Slave
Initiator
Command (arguments)
Base Micro
ISA_Request (DataRepeater)
Possible Response
ISA_Confirm (Transmission_Status)
Frame Format :
<STX> Length
< ISA_Request >
Data_ISA
CHK
http://onsemi.com
40
|
▷ |