AMIS-49587 Datasheet, PDF (32/59 Pages) ON Semiconductor – Power Line Carrier Modem

AMIS−49587
See Section The Objects Available on and The Objects Available Only on AMIS−49587 versions for more details on each object.
Syntax:
Initiator
Base Micro
Master/Slave
Command (arguments)
WriteDB_Request (DB_Data_Id)
Possible Response
WriteDB_Confirm (DB_Data_Id_Echo)
WriteDB_Error (Error_Code)
Frame Format:
<STX>
Length
< WriteDB_Request >
DB_Data_Id
CHK
Table 35. LIST OF WRITEDB ITEMS
Field Name
FIMA/LIMA
LocalMacAdd/InitMacAdd
Time−out−synchro−confirm
Time−out−frame−not−ok
Time−out−not−addressed
Mac−group−addresses
Invalid−frame−counter
Min−delta−credit
Max_Transmitting_Gain : Mode and Value
(R_ALC_CTRL )
SYNCHRO−Type:Mode
SYNCHRO−Bit:Value
Max−Receiving−Gain: Mode and Value
Repeater
Frequency
Counters
PhyAlarmRequest
DataStats
Time−SearchInitiator
ReadConfig
Read SoftVersion
Min−ReceivingGain Value
Gain−SearchInitiator
Ident
0000
0001
0002
0003
0004
0005
0006
0007
0008
0009
000A
000B
000C
000D
000F
0010
0011
0012
0013
0014
0015
Description
Changes the value of First Initiator MAC Address (FIMA) and Last Initiator MAC
Address (LIMA)
Changes the value of Local MAC
Address and Active Initiator Address
Changes the value of the TO synchro confirm (In seconds.)
Changes the value of the TO frame not ok (In seconds)
Changes the value of the TO not addressed (In minutes)
Changes the value of the 5 MAC group addresses
Read the value of the invalid−frame counter and then set to 0
Read the value of the Min delta credit and then set to 7
Changes the mode and the value of the max transmitting gain
Changes sychro mode and the synchro bit value
Changes the mode and the value of the Max Receiving gain
Changes the repeater state
Changes the value of the frequencies Fs and Fm
Read the value of the data counters:Counter Crc Ok, Counter Crc Not Ok,
Repeater counter, Transmit counter, corrected frames counter, and then set to 0
or not
Request the transmission of a Phy Alarm
Read the value of the Data statistics, and then set to 0 or not.
Changes the value of the TO Search Initiator (In seconds)
To get an echo of the current configuration of the FPMA
Read the version of the FPMA
Changes the value of the Min Receiving Gain
Changes the value of the Gain−SearchInitiator
http://onsemi.com
32