SDA9415-B13 Datasheet, PDF (83/185 Pages) Micronas – Display Processor and Scan Rate Converter

SDA 9415 - B13
Preliminary Data Sheet
I²C Bus parameter
[Default value]
NALOPD
[22]
ALPFOPD
[144]
VERPOSM
[0]
Sub address
36h
37h
3Ch
VERWIDTHM
40h
[72]
VERPOSS
3Dh
[0]
VERWIDTHS
41h
[144]
LPFOP
38h
[156]
NAPOPD
39h
[0]
APPLOPD
43h
[90]
HORPOSM
3Ah
[0]
HORWIDTHM
3Eh
[90]
HORPOSS
3Bh
[0]
HORWIDTHS
[180]
PPLOP
[432]
BLANDEL
[0]
BLANLEN
[180]
HOUTDEL
[0]
PRIORMS
[1]
3Fh
45h, 46h
42h
44h
35h
43h
83
Description
Not Active Line OutPut Display defines the number of lines
from the V-Sync to the first active line of the output frame
Active Lines Per Field OutPut Display defines the number of
active lines per output frame
VERtical POSition Master defines the number of lines from the
first active line of the background channel to the first active line
of the master channel
VERtical WIDTH Master defines the number of active lines of
the master channel per output frame
VERtical POSition Slave defines the number of lines from the
first active line of the background channel to the first active line
of the slave channel
VERtical WIDTH Slave defines the number of active lines of
the slave channel per output frame
Lines Per Frame OutPut defines the number of lines per output
frame (only valid for VOUTFR=1)
Not Active Pixel OutPut Display defines the number of pixels
from the H-Sync to the first active pixel
Active Pixels Per Line OutPut Display defines the number of
pixels per line (background, master and slave channel)
HORizontal POSition Master defines the number of pixels from
the first active pixel of the background channel to the first
active pixel of the master channel
HORizontal WIDTH Master defines the number of active pixels
of the master channel
HORizontal POSition Slave defines the number of pixels from
the first active pixel of the background channel to the first
active pixel of the slave channel
HORizontal WIDTH Slave defines the number of active pixels
of the slave channel
Pixel Per Line OutPut defines the number of pixels between
two consecutive H-Syncs (only valid for HOUTFR=1)
BLANk DELay defines the distance from the H-Sync to the
active edge of the BLANK signal in number of CLKD clocks
BLANk LENgth defines the length of the BLANK signal in
number of CLKD clocks
Horizontal delay of HOUT and VOUT signal in clocks of CLKD
Priority of master or slave channel:
1: master channel priority
0: slave channel priority
(SFCPR should be fixed to V_SS).
Micronas