SDA9415-B13 Datasheet, PDF (82/185 Pages) Micronas – Display Processor and Scan Rate Converter

SDA 9415 - B13
Preliminary Data Sheet
1: Background channel
2: Output channel master
3: Output channel slave
The background channel has always the lowest priority. The priority between output
channel master and slave is defined by an I²C Bus parameter PRIORMS. The figure
below shows an example for the combination of the three channels. The background
colour black has lowest priority. The picture content of master channel is a phone and
the picture content of slave channel is a airplane. In this case the slave channel has the
highest priority. To enable or disable the display of the master or slave channel the I²C
parameters MASTERON and SLAVEON can be used.
VOUT
HOUT
(PPLOP*2)*CLKD
4*LPFOP+1
VERPOSM _VERPOSS
(NALOPD+1)*2
VERWIDTHS*4
ALPFOPD*8
VERWIDTHM*8
(HORPOSM*4)*CLKD
(HORWIDTHM*8)*CLKD
(HORPOSS*4)*CLKD
(HORWIDTHS*4)*CLKD
(NAPOPD*4)*CLKD
(APPLOPD*8)*CLKD
Figure 35
BLANK
((6 MSBs of BLANDEL)*8 + (2
LSBs of BLANDEL))*CLKD
(BLANLEN*8)*CLKD
Output I²C Bus parameter
82
Micronas