SDA9415-B13 Datasheet, PDF (15/185 Pages) Micronas – Display Processor and Scan Rate Converter

SDA 9415 - B13
Preliminary Data Sheet
Features
converter
- 36 kbit SRAM for block matching, line-to-block converter
• Flexible clock and synchronization concept
- Decoupling of the input and output clock system possible
• Scan rate conversion
- Motion compensated 100/120 Hz interlaced scan conversion (Micronas VDU)
- Motion compensated 50/60 Hz progressive scan conversion (Micronas VDU)
- Simple interlaced modes: ABAB, AABB, AAAA, BBBB
- Simple progressive modes: AB, AA*, B*B
- True Motion: 50 Hz motion resolution even for 25 Hz PAL film sources
60 Hz motion resolution even for 30 Hz NTSC film sources
- Large area and line flicker reduction
• Flexible digital vertical expansion of the output signal (1.0, ... [1/64] ... , 2.0)
• Sharpness improvement
- Digital colour transition improvement (DCTI)
- Digital luminance transition improvement (DLTI)
- Peaking (luminance only)
• Flexible output sync controller
- Flexible positioning of the two output channels in all application modes
- Flexible height and width of the two output pictures
- Flexible programming of the output sync raster
• Signal manipulations
- Still frame or field
- Insertion of coloured background
- Insertion of a selection border
- Adjustable delay between Y and UV signal (+4,...[1]...,-3 input pixels) at the input
side
- Adjustable delay between Y and UV signal (+3,...[0.5]...,- 4 output pixels) at the
output side
• Three D/A converters
- 9 bit amplitude resolution for Y, -(R-Y), -(B-Y) output
- 60 MHz maximal clock frequency
- Two-fold oversampling
- Simplification of external analog post filtering and differential analog outputs
• I²C-bus control (400 kHz)
• P-MQFP-100 package
• 3.3 V ± 5% supply voltage
15
Micronas