PIC18LF2X_13 Datasheet, PDF (442/560 Pages) Microchip Technology – PIC18(L)F2X/45K50 USB Flash MCU Product Brief

PIC18(L)F2X/4XK22
27.8 DC Characteristics:Input/Output Characteristics, PIC18(L)F2X/4XK22 (Continued)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C TA  +125°C
Param
No.
Symbol
Characteristic
Min
Typ†
Max Units
Conditions
VOL
Output Low Voltage
D159
I/O ports
IOL = 8 mA, VDD = 5V
—
—
0.6
V IOL = 6 mA, VDD = 3.3V
IOL = 1.8 mA, VDD = 1.8V
VOH
Output High Voltage⁽³⁾
D161
I/O ports
VDD - 0.7
—
IOH = 3.5 mA, VDD = 5V
—
V IOH = 3 mA, VDD = 3.3V
IOH = 1 mA, VDD = 1.8V
Note 1: In RC oscillator configuration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that
the PIC^® device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
4: Parameter is characterized but not tested.
DS41412F-page 442
 2010-2012 Microchip Technology Inc.