PIC18LF2X_13 Datasheet, PDF (435/560 Pages) Microchip Technology – PIC18(L)F2X/45K50 USB Flash MCU Product Brief

PIC18(L)F2X/4XK22
27.4 DC Characteristics: RC Idle Supply Current, PIC18(L)F2X/4XK22
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
Param
No.
Device Characteristics
Typ Max Units
Conditions
D045 Supply Current (IDD)^(1),(2) 0.5 18 A
0.6 18 A
0.7 — A
-40°C
+25°C
+60°C
VDD = 1.8V
FOSC = 31 kHz
(RC_IDLE mode,
LFINTOSC source)
0.75 20 A
+85°C
2.3 22 A
+125°C
D046
1.1 20 A
-40°C
VDD = 3.0V
1.2 20 A
+25°C
1.3 — A
+60°C
1.4 22 A
+85°C
3.2 25 A
+125°C
D047
17 30 A
13 30 A
14 30 A
-40°C
+25°C
+85°C
VDD = 2.3V
FOSC = 31 kHz
(RC_IDLE mode,
LFINTOSC source)
15 45 A
+125°C
D048
19 35 A
-40°C
VDD = 3.0V
15 35 A
+25°C
16 35 A
+85°C
17 50 A
+125°C
D049
21 40 A
-40°C
VDD = 5.0V
15 40 A
+25°C
16 40 A
+85°C
18 60 A
+125°C
D050
D051
0.11 0.20
0.12 0.25
mA -40°C to +125°C
mA -40°C to +125°C
VDD = 1.8V
VDD = 3.0V
FOSC = 500 kHz
(RC_IDLE mode,
MFINTOSC source)
D052
D053
D054
0.14 0.21
0.15 0.25
0.20 0.31
mA -40°C to +125°C
mA -40°C to +125°C
mA -40°C to +125°C
VDD = 2.3V
VDD = 3.0V
VDD = 5.0V
FOSC = 500 kHz
(RC_IDLE mode,
MFINTOSC source)
Note 1:
2:
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
Test condition: All Peripheral Module Control bits in PMD0, PMD1 and PMD2 set to ‘1’.
The test conditions for all IDD measurements in active operation mode are:
All I/O pins set as outputs driven to Vss;
MCLR = VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).
 2010-2012 Microchip Technology Inc.
DS41412F-page 435