PIC18LF2X_13 Datasheet, PDF (433/560 Pages) Microchip Technology – PIC18(L)F2X/45K50 USB Flash MCU Product Brief

PIC18(L)F2X/4XK22
27.3 DC Characteristics: RC Run Supply Current, PIC18(L)F2X/4XK22
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
Param
No.
Device Characteristics
Typ Max Units
D020 Supply Current (IDD)^(1),(2) 3.6 23 A
3.9 25 A
3.9 — A
3.9 28 A
-40°C
+25°C
+60°C
+85°C
Conditions
VDD = 1.8V
FOSC = 31 kHz
(RC_RUN mode,
LFINTOSC
source)
4.0 30 A
125°C
D021
8.1 26 A
-40°C
VDD = 3.0V
8.4 30 A
+25°C
8.6 — A
+60°C
8.7 35 A
+85°C
10.7 40 A
+125°C
D022
16 35 A
17 35 A
18 35 A
19 50 A
-40°C
+25°C
+85°C
+125°C
VDD = 2.3V
FOSC = 31 kHz
(RC_RUN mode,
LFINTOSC
source)
D023
18 50 A
-40°C
VDD = 3.0V
20 50 A
+25°C
21 50 A
+85°C
22 60 A
+125°C
D024
19 55 A
-40°C
VDD = 5.0V
21 55 A
+25°C
22 55 A
+85°C
23 70 A
+125°C
D025
D026
0.14 0.25 mA -40°C to +125°C
0.17 0.30 mA -40°C to +125°C
VDD = 1.8V
VDD = 3.0V
FOSC = 500 kHz
(RC_RUN mode,
MFINTOSC
source)
D027
D028
D029
0.18 0.25 mA -40°C to +125°C
0.20 0.30 mA -40°C to +125°C
0.25 0.35 mA -40°C to +125°C
VDD = 2.3V
VDD = 3.0V
VDD = 5.0V
FOSC = 500 kHz
(RC_RUN mode,
MFINTOSC
source)
Note 1:
2:
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
Test condition: All Peripheral Module Control bits in PMD0, PMD1 and PMD2 set to ‘1’.
The test conditions for all IDD measurements in active operation mode are:
All I/O pins set as outputs driven to Vss;
MCLR = VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).
 2010-2012 Microchip Technology Inc.
DS41412F-page 433