PIC18LF2X_13 Datasheet, PDF (436/560 Pages) Microchip Technology – PIC18(L)F2X/45K50 USB Flash MCU Product Brief

PIC18(L)F2X/4XK22
27.4 DC Characteristics: RC Idle Supply Current, PIC18(L)F2X/4XK22 (Continued)
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
Param
No.
Device Characteristics
Typ Max Units
Conditions
D055
D056
0.25 0.40
0.35 0.50
mA -40°C to +125°C
mA -40°C to +125°C
VDD = 1.8V
VDD = 3.0V
FOSC = 1 MHz
(RC_IDLE mode,
HFINTOSC source)
D057
D058
D059
0.30 0.45
0.40 0.50
0.45 0.60
mA -40°C to +125°C
mA -40°C to +125°C
mA -40°C to +125°C
VDD = 2.3V
VDD = 3.0V
VDD = 5.0V
FOSC = 1 MHz
(RC_IDLE mode,
HFINTOSC source)
D060
D061
0.50 0.7
0.80 1.1
mA -40°C to +125°C
mA -40°C to +125°C
VDD = 1.8V
VDD = 3.0V
FOSC = 16 MHz
(RC_IDLE mode,
HFINTOSC source)
D062
D063
D064
0.65 1.0
0.80 1.1
0.95 1.2
mA -40°C to +125°C
mA -40°C to +125°C
mA -40°C to +125°C
VDD = 2.3V
VDD = 3.0V
VDD = 5.0V
FOSC = 16 MHz
(RC_IDLE mode,
HFINTOSC source)
D066
2.5 3.5 mA -40°C to +125°C VDD = 3.0V FOSC = 64 MHz
(RC_IDLE mode,
HFINTOSC + PLL
source)
D068
D069
2.5 3.5 mA -40°C to +125°C VDD = 3.0V FOSC = 64 MHz
3.0 4.5 mA -40°C to +125°C VDD = 5.0V ^{(RC_IDLE mode,}
HFINTOSC + PLL
source)
Note 1:
2:
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
Test condition: All Peripheral Module Control bits in PMD0, PMD1 and PMD2 set to ‘1’.
The test conditions for all IDD measurements in active operation mode are:
All I/O pins set as outputs driven to Vss;
MCLR = VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).
DS41412F-page 436
 2010-2012 Microchip Technology Inc.