English
Language : 

PIC18F2455_07 Datasheet, PDF (374/430 Pages) Microchip Technology – 28/40/44-Pin, High Performance, Enhanced Flash, USB Microcontrollers with nanoWatt Technology
PIC18F2455/2550/4455/4550
28.3 DC Characteristics: PIC18F2455/2550/4455/4550 (Industrial)
PIC18LF2455/2550/4455/4550 (Industrial)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for industrial
Param
No.
Symbol
Characteristic
Min
Max Units
Conditions
VIL
Input Low Voltage
I/O ports (except RC4/RC5 in
USB mode):
D030
with TTL buffer
VSS
0.15 VDD V VDD < 4.5V
D030A
—
0.8
V 4.5V ≤ VDD ≤ 5.5V
D031
with Schmitt Trigger buffer
RC3 and RC4
VSS
0.2 VDD V
VSS
0.3 VDD V
D032
MCLR
VSS
0.2 VDD V
D032A
D033
OSC1 and T1OSI
OSC1
VSS
0.3 VDD V XT, HS,
HSPLL modes(1)
VSS
0.2 VDD V EC mode(1)
VILU D+/D- input
—
0.8
V VDD = 4.35V,
USB suspended(5)
VIH Input High Voltage
I/O ports (except RC4/RC5 in
USB mode):
D040
with TTL buffer
0.25 VDD + 0.8V VDD
V VDD < 4.5V
D040A
2.0
VDD
V 4.5V ≤ VDD ≤ 5.5V
D041
with Schmitt Trigger buffer
RC3 and RC4
0.8 VDD
0.7 VDD
VDD
V
VDD
V
D042
MCLR
0.8 VDD
VDD
V
D042A
D043
OSC1 and T1OSI
OSC1
0.7 VDD
0.8 VDD
VDD
V XT, HS,
HSPLL modes(1)
VDD
V EC mode(1)
VIHU D+/D- input
IIL
Input Leakage Current(2,3)
2.4
—
V VDD = 4.35V,
USB suspended(5)
D060
I/O ports
—
±1
μA VSS ≤ VPIN ≤ VDD,
Pin at high-impedance
D061
MCLR
—
±5
μA Vss ≤ VPIN ≤ VDD
D063
OSC1
—
±5
μA Vss ≤ VPIN ≤ VDD
IPU
Weak Pull-up Current
D070 IPURB PORTB weak pull-up current
50
400
μA VDD = 5V, VPIN = VSS
Note 1: In RC oscillator configuration, the OSC1/CLKI pin is a Schmitt Trigger input. It is not recommended that the
PIC® device be driven with an external clock while in RC mode.
2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltages.
3: Negative current is defined as current sourced by the pin.
4: Parameter is characterized but not tested.
5: D+ parameters per USB Specification 2.0.
DS39632D-page 372
Preliminary
© 2007 Microchip Technology Inc.