PIC18LF2XK22 Datasheet, PDF (32/42 Pages) Microchip Technology – Flash Memory Programming Specification

PIC18(L)F2XK22/4XK22
TABLE 5-3:
Bit Name
DEBUG
XINST
LVP
STVREN
.
PIC18(L)F2XK22/4XK22 BIT DESCRIPTIONS (CONTINUED)
Configuration
Words
Description
CONFIG4L
Background Debugger Enable bit
1 = Background debugger disabled, RB6 and RB7 configured as general
purpose I/O pins
0 = Background debugger enabled, RB6 and RB7 are dedicated to In-Circuit Debug
CONFIG4L Extended Instruction Set Enable bit
1 = Instruction set extension and Indexed Addressing mode enabled
0 = Instruction set extension and Indexed Addressing mode disabled
(Legacy mode)
CONFIG4L Low-Voltage Programming Enable bit
If MCLRE = 1, then:
1 = Low-Voltage Programming enabled
0 = Low-Voltage Programming disabled
If MCLRE = 0, then:
LVP is disabled
CONFIG4L Stack Overflow/Underflow Reset Enable bit
1 = Reset on stack overflow/underflow enabled
0 = Reset on stack overflow/underflow disabled
DS41398B-page 32
Advance Information
 2010 Microchip Technology Inc.