PIC16F1829LIN Datasheet, PDF (58/74 Pages) Micon Design Technology Corporation – 20-Pin, 8-bit Flash LIN/J2602 Microcontroller

PIC16F1829LIN
10.0 ELECTRICAL SPECIFICATIONS
Absolute Maximum Ratings^(†)
Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature............................................................................................................................... -65°C to +150°C
Voltage on VDD with respect to VSS.......................................................................................................... -0.3V to +6.5V
Voltage on MCLR with respect to Vss.......................................................................................................-0.3V to +9.0V
Voltage on all other logic level pins with respect to VSS..................................................................-0.3V to (VDD + 0.3V)
Total power dissipation (Note 5)...........................................................................................................................800 mW
Maximum current out of VSS pin, -40°C  TA  +125°C for extended..................................................................... 35 mA
Maximum current into VDD pin, -40°C  TA  +125°C for extended........................................................................ 30 mA
Clamp current, IK (VPIN < 0 or VPIN > VDD)..........................................................................................................20 mA
Maximum output current sunk by any I/O pin..........................................................................................................25 mA
Maximum output current sourced by any I/O pin.....................................................................................................25 mA
VBB Battery Voltage, non-operating (LIN bus recessive, no regulator load, t < 60s)..................................... -0.3 to +43V
VBB Battery Voltage, transient ISO 7637 Test 1 ..................................................................................................... -200V
VBB Battery Voltage, transient ISO 7637 Test 2a ...................................................................................................+150V
VBB Battery Voltage, transient ISO 7637 Test 3a ................................................................................................... -300V
VBB Battery Voltage, transient ISO 7637 Test 3b ...................................................................................................+200V
VBB Battery Voltage, continuous ................................................................................................................... -0.3 to +30V
VLBUS Bus Voltage, continuous ...................................................................................................................... -18 to +30V
VLBUS Bus Voltage, transient (Note 1) ........................................................................................................... -27 to +43V
ILBUS Bus Short Circuit Current Limit ....................................................................................................................200 mA
ESD protection on LIN, VBB (IEC 61000-4-2, 330 Ohm, 150 pF) (Note 3) .............................................. Minimum ±9 kV
ESD protection on LIN, VBB (Charge Device Model) (Note 2) ..............................................................................±1500V
ESD protection on LIN, VBB (Human Body Model, 1 kOhm, 100 pF) (Note 4) .......................................................±8 kV
ESD protection on LIN, VBB (Machine Model) (Note 2) ..........................................................................................±800V
ESD protection on all other pins (Human Body Model) (Note 2) ............................................................................> 4 kV
Maximum Junction Temperature ............................................................................................................................. 150C
Storage Temperature...................................................................................................................................-55 to +150C
Note 1: ISO 7637/1 load dump compliant (t < 500 ms).
2: According to JESD22-A114-B.
3: According to IBEE, without bus filter.
4: Limited by Test Equipment.
5: Power dissipation is calculated as follows:
PDIS = VDD x {IDD –  IOH} +  {(VDD – VOH)
x IOH} + (VOl x IOL).
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure above maximum rating conditions for
extended periods may affect device reliability.
DS41673A-page 58
Preliminary
 2012 Microchip Technology Inc.