PIC16F1829LIN Datasheet, PDF (10/74 Pages) Micon Design Technology Corporation – 20-Pin, 8-bit Flash LIN/J2602 Microcontroller

PIC16F1829LIN
TABLE 1-2: PIC16F1829LIN PINOUT DESCRIPTION (CONTINUED)
Name
Function
Input Output
Type Type
Description
RA5/CLKIN/OSC1/T1OSI/
T1CKI/P2A⁽¹⁾/CCP2⁽¹⁾
RA5
CLKIN
TTL CMOS General purpose I/O.
CMOS — External clock input (EC mode).
OSC1 XTAL — Crystal/Resonator (LP, XT, HS modes).
T1OSI XTAL XTAL Timer1 oscillator connection.
T1CKI
ST
— Timer1 clock input.
P2A
— CMOS PWM output.
CCP2
ST CMOS Capture/Compare/PWM 2.
RB4/AN10/CPS10
RB4
TTL CMOS General purpose I/O.
AN10
AN
— A/D Channel 10 input.
RB5⁽³⁾/RX^(1,2)/
CPS10
RB5
AN
— Capacitive sensing input 10.
TTL CMOS General purpose I/O.
RB6⁽³⁾/CS/LWAKE
RX
ST
— USART asynchronous input.
RB6
TTL CMOS General purpose I/O.
RB7⁽³⁾/TX^(1,2)
CS/
LWAKE
RB7
TTL OD LIN Transceiver Chip Select and Wake-up.
TTL CMOS General purpose I/O.
RC0/AN4/CPS4/C2IN+/P1D⁽¹⁾
TX
RC0
— CMOS USART asynchronous transmit.
TTL CMOS General purpose I/O.
AN4
AN
— A/D Channel 4 input.
CPS4
AN
— Capacitive sensing input 4.
C2IN+
AN
— Comparator C2 positive input.
RC1/AN5/CPS5/C12IN1-/P1C⁽¹⁾
P1D
RC1
— CMOS PWM output.
TTL CMOS General purpose I/O.
AN5
AN
— A/D Channel 5 input.
CPS5
AN
— Capacitive sensing input 5.
C12IN1- AN
— Comparator C1 or C2 negative input.
P1C
— CMOS PWM output.
RC2/AN6/CPS6/C12IN2-/
P1D^(1,2)/P2B^(1,2)/MDCIN1
RC2
AN6
TTL CMOS General purpose I/O.
AN
— A/D Channel 6 input.
CPS6
AN
— Capacitive sensing input 6.
C12IN2- AN
— Comparator C1 or C2 negative input.
P1D
— CMOS PWM output.
P2B
— CMOS PWM output.
MDCIN1 ST
— Modulator Carrier Input 1.
RC3/AN7/CPS7/C12IN3-/
P2A^(1,2)/CCP2^(1,2)/P1C^(1,2)/
MDMIN
RC3
AN7
CPS7
TTL CMOS General purpose I/O.
AN
— A/D Channel 7 input.
AN
— Capacitive sensing input 7.
C12IN3- AN
— Comparator C1 or C2 negative input.
P2A
— CMOS PWM output.
CCP2
AN
— Capacitive sensing input 2.
P1C
— CMOS PWM output.
MDMIN ST
— Modulator source input.
Legend: AN = Analog input or output CMOS = CMOS compatible input or output
OD = Open Drain
TTL = TTL compatible input ST = Schmitt Trigger input with CMOS levels I²C™ = Schmitt Trigger input with I²C
HV = High Voltage
XTAL = Crystal
levels
Note 1: Pin functions can be moved using the APFCON0 or APFCON1 register.
2: Default function location.
3: Internal Connection. No associated external pin.
DS41673A-page 10
Preliminary
 2012 Microchip Technology Inc.