PIC16F1829LIN Datasheet, PDF (55/74 Pages) Micon Design Technology Corporation – 20-Pin, 8-bit Flash LIN/J2602 Microcontroller

PIC16F1829LIN
REGISTER 8-2: RCSTA: RECEIVE STATUS AND CONTROL REGISTER
R/W-0/0
SPEN
bit 7
R/W-0/0
RX9
R/W-0/0
SREN
R/W-0/0
CREN
R/W-0/0
ADDEN
R-0/0
FERR
R-0/0
OERR
R-x/x
RX9D
bit 0
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
bit 7
SPEN: Serial Port Enable bit
1 = Serial port enabled (configures RX/DT and TX/CK pins as serial port pins)
0 = Serial port disabled (held in Reset)
bit 6
RX9: Must be ‘0’
bit 5
SREN: Don’t Care
bit 4
CREN: Continuous Receive Enable bit
1 = Enables receiver
0 = Disables receiver
bit 3
ADDEN: Must be ‘0’
bit 2
FERR: Framing Error bit
1 = Framing error (can be updated by reading RCREG register and receive next valid byte)
0 = No framing error
bit 1
OERR: Overrun Error bit
1 = Overrun error (can be cleared by clearing bit CREN)
0 = No overrun error
bit 0
RX9D: Must be ‘0’
 2012 Microchip Technology Inc.
Preliminary
DS41673A-page 55