PIC16F1829LIN Datasheet, PDF (2/74 Pages) Micon Design Technology Corporation – 20-Pin, 8-bit Flash LIN/J2602 Microcontroller

PIC16F1829LIN
Peripheral Features: (Continued)
• Enhanced Universal Synchronous Asynchronous
Receiver Transmitter (EUSART) Module:
- Supports LIN 2.1 and J2602
- Auto-Baud Detect
- Auto Wake-up on BREAK character
• mTouch™ Sensing Oscillator Module:
- Up to 12 input channels
• Data Signal Modulator Module:
- Selectable modulator and carrier sources
• SR Latch:
- Multiple Set/Reset input options
- Emulates 555 Timer applications
• On-board Voltage Regulator:
- Output voltage of 5.0V with tolerances of
±2% over temperature range
- Maximum continuous input voltage of 30V
- Internal thermal overload protection
- Internal short circuit current limit
- External components limited to filter capacitor
only and load capacitor
- Automatic thermal shutdown
PIC16F1829LIN Device Overview
Program Memory Data Memory
• Internal Bus Transceiver compliant with LIN Bus
Specifications 1.3, 2.0 and 2.1, and compliant to
SAE J2602:
- Support Baud Rates up to 20 Kbaud
- 43V load dump protected
- Very low EMI meets stringent OEM
requirements
- Wide supply voltage, 7.0V-30.0V continuous
- Internal bus pull-up resistor and diode
- Protected against ground shorts
- Protected against loss of ground
- High current drive
- Automatic thermal shutdown
• Extended Temperature Range: -40 to +125°C
PIC16F1829LIN
8K
1024
256 13 9 12 2 4/1 1 1 1 1⁽³⁾ Yes ^LIN/J2602
Transceiver,
Voltage Regulator
Note 1: One pin is input-only.
2: EUSART dedicated to LIN communications.
3: One CCP only available internally.
DS41673A-page 2
Preliminary
 2012 Microchip Technology Inc.