EP82562ET Datasheet, PDF (23/40 Pages) Intel Corporation – 10/100 Mbps Platform LAN Connect (PLC)

Networking Silicon — 82562ET
5.1.3
5.1.4
Bit(s)
Name
Description
6
Management
This bit allows the 82562ET to receive management
Frames Preamble frames with suppressed preamble.
Suppression
0 = PHY will not accept management frames with
preamble suppressed
1 = PHY will accept management frames with
preamble suppressed
5
Auto-Negotiation This bit reflects status of the Auto-Negotiation
Complete
process.
0 = Auto-Negotiation process has not completed
1 = Auto-Negotiation process completed
4
Remote Fault
0 = No remote fault condition detected
1 = Remote fault condition detected
3
Auto-Negotiation This bit reflects the PHY’s Auto-Negotiation ability
Ability
status.
0 = PHY is unable to perform Auto-Negotiation
1 = PHY is able to perform Auto-Negotiation
2
Link Status
This bit reflects link status.
0 = Invalid link detected
1 = Valid link established
1
Jabber Detect
This bit is used only in 10BASE-T mode.
0 = No jabber condition detected
1 = Jabber condition detected
0
Extended
Capability
This bit enables the extended register capabilities.
0 = Extended register capabilities disabled
1 = Extended register capabilities enabled
Default
0
R/W
RO
0
RO
0
RO
1
RO
0
RO
LL
0
RO
LH
1
RO
Register 2: PHY Identifier Register Bit Definitions
Bit(s)
Name
15:0 PHY ID (high
byte)
Description
Value: 02A8 hexadecimal
Default
--
R/W
RO
Register 3: PHY Identifier Register Bit Definitions
Bit(s)
Name
Description
15:0 PHY ID (low byte) Value: 0330 hexadecimal
Default
--
R/W
RO
Datasheet
19