TC1762 Datasheet, PDF (88/114 Pages) Infineon Technologies AG – 32-Bit Single-Chip Microcontroller TriCore

TC1762
Preliminary
11) This value applies in power-down mode.
12) Not subject to production test, verified by design / characterization.
Electrical Parameters
The calibration procedure should run after each power-up, when all power supply
voltages and the reference voltage have stabilized. The offset calibration must run first,
followed by the gain calibration.
FAINxN
V_{FAG ND}
FAINxP
FADC Analog Input Stage
R_N
-
+
V_{FARE F} /2
+
R_P
-
V_FAREF
V_FAREF
V_{FAG ND}
FADC Reference Voltage
Input Circuitry
I_FAREF
Figure 4-4 FADC Input Circuits
FADC_InpRefDiag
Data Sheet
84
V1.0, 2008-04