IC-PVL Datasheet, PDF (6/33 Pages) IC-Haus GmbH – LINEAR/OFF-AXIS BATTERY-BUFFERED HALL MULTITURN ENCODER

iC-PVL LINEAR/OFF-AXIS
preliminary
BATTERY-BUFFERED HALL MULTITURN ENCODER
Rev B3, Page 6/33
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 V(VDD) Voltage at VDD
-0.3
6
V
G002 V(VBAT) Voltage at VBAT
VDD > Von: VBAT < VDD + 1.0 V
-0.3
6
V
G003 V(VDDS) Voltage at VDDS
-0.3
6
V
G004 V()
Voltage at SCL, SDA, DI_P1, CLK_N1,
DO_P0, N0, NERR, NWRN, P2, N2,
PRE, SEL
-0.3
6
V
G005 I(VDD) Current in VDD
-10
50
mA
G006 I(VBAT) Current in VBAT
-10
50
mA
G007 I(VDDS) Current in VDDS
-10
50
mA
G008 I(GND) Current in GND
-50
10
mA
G009 I()
Current in SCL, SDA, DI_P1, CLK_N1,
DO_P0, N0, NERR, NWRN, P2, N2,
PRE, SEL
-30
30
mA
G010 Vd()
ESD Susceptibility at All Pins
HBM, 100 pF discharged through 1.5 kΩ
2
kV
G011 Tj
Junction Temperature
-40
150
°C
G012 Ts
Storage Temperature Range
-40
150
°C
THERMAL DATA
Operating conditions:
VDD = 3.0...5.5 V, VBAT < VDD + 1.0 V
Item Symbol Parameter
No.
Conditions
Unit
Min. Typ. Max.
T01 Ta
Operating Ambient Temperature Range package QFN16
-40
125 ° C
T02 Rthja
Thermal Resistance Chip/Ambience QFN16-4x4 surface mounted to PCB
40
K/W
according to JEDEC 51 thermal measurement
standards
All voltages are referenced to ground unless otherwise stated.
All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.