IC-MD_17 Datasheet, PDF (29/30 Pages) IC-Haus GmbH – 48-BIT QUADRATURE COUNTER

iC-MD 48-BIT QUADRATURE COUNTE^pR^reliminary
WITH RS422 RECEIVER AND SPI/BISS INTERFACE
DESIGN REVIEW: Notes On Chip Functions
Rev B1, Page 29/30
iC-MD X
No. Function,
Parameter/Code
1
Description and Application Hints
No further notes at time of printing.
Table 72: Notes on chip functions regarding iC-MD chip
release X.
REVISION HISTORY
Rel. Rel. Date^∗ Chapter
A1 2010-11-02
Modification
Initial release
Rel. Rel. Date^∗ Chapter
A2 2012-02-22
Modification
Tables added, more detailed explanations
Rel. Rel. Date^∗ Chapter
A3 2013-03-04
DESCRIPTION
REVISION HISTORY
Modification
New title: 48-BIT QUADRATURE COUNTER
BUA info added
REVISION HISTORY added
Rel. Rel. Date^∗ Chapter
A4 2015-02-18 STATUS REGISTER and
ERROR/WARNING INDICATION
Modification
MASK and NMASK figures added
Rel. Rel. Date^∗ Chapter
B1 2017-3-30 ELECTRICAL
CHARACTERISTICS
ELECTRICAL
CHARACTERISTICS
REGISTER MAP
COUNTER CONFIGURATION
BiSS and SSI INTERFACE
BiSS and SSI INTERFACE
INTERFACE PRIORITY
REVISION HISTORY
Modification
item 004, 201, 604 and C01 updated
ENSSI replaces ENBISS, item i107 -113 removed, figure 4 removed,
operating conditions updated,
Added ”SPI and BiSS read only”
Table 13 address bits (2:0) updated
BiSS identifier details added
Table 70 updated 0x7E 0x7F for BiSS Device Manufacturer
Table 71 address bit (0) updated
REVISION HISTORY updated
Page
all
Page
n.a.
Page
1
2
26
Page
20, 21
Page
5, 6
8
10
12
26
26
26
29
iC-Haus expressly reserves the right to change its products and/or specifications. An Infoletter gives details as to any amendments and additions made to the
relevant current specifications on our internet website www.ichaus.com/infoletter and is automatically generated and shall be sent to registered users by email.
Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source.
The data specified is intended solely for the purpose of product description and shall represent the usual quality of the product. In case the specifications contain
obvious mistakes e.g. in writing or calculation, iC-Haus reserves the right to correct the specification and no liability arises insofar that the specification was from
a third party view obviously not reliable. There shall be no claims based on defects as to quality in cases of insignificant deviations from the specifications or in
case of only minor impairment of usability.
No representations or warranties, either expressed or implied, of merchantability, fitness for a particular purpose or of any other nature are made hereunder
with respect to information/specification or the products to which information refers and no guarantee with respect to compliance to the intended use is given. In
particular, this also applies to the stated possible applications or areas of applications of the product.
iC-Haus products are not designed for and must not be used in connection with any applications where the failure of such products would reasonably be
expected to result in significant personal injury or death (Safety-Critical Applications) without iC-Haus’ specific written consent. Safety-Critical Applications
include, without limitation, life support devices and systems. iC-Haus products are not designed nor intended for use in military or aerospace applications or
environments or in automotive applications unless specifically designated for such use by iC-Haus.
iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade
mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.
Software and its documentation is provided by iC-Haus GmbH or contributors "AS IS" and is subject to the ZVEI General Conditions for the Supply of Products
and Services with iC-Haus amendments and the ZVEI Software clause with iC-Haus amendments (www.ichaus.com/EULA).
∗ _{Release Date format: YYYY-MM-DD}