IC-JX_16 Datasheet, PDF (11/48 Pages) IC-Haus GmbH – 16-FOLD 24 V HIGH-SIDE DRIVER

iC-JX
16-FOLD 24 V HIGH-SIDE DRIVER WITH µC INTERFACE
Rev C2, Page 11/48
ELECTRICAL CHARACTERISTICS
Operating conditions: VCC = VDD = 3 ... 5.5 V, VBy = 12 ... 36 V, GNDA = GNDD = 0 V, RSET = 10 kΩ ±1% . All inputs on defined logic
states (high or low), Tj = -40 ... 125 °C unless otherwise stated. Functionality and parameters beyond operating conditions (for example w.r.
to independent voltage supplies) are to be verified within the individual application by FMEA methods.
Item Symbol Parameter
No.
Conditions
Unit
Min. Typ. Max.
µC-Interface, I/O-Logic, Frequency divider, Interrupt
K01 Vt()hi
Threshold voltage High at Schmit- D0...7 with input function
t-Trigger-Inputs
NCS, NWR, NRD, A0...4, NRES,
CLK, BLFQ, D0...7, NSP, POE
2
V
K02 Vt()lo
Threshold voltage Low at Schmit- D0...7 with input function
t-Trigger-Inputs
NCS, NWR, NRD, A0...4, NRES,
CLK, BLFQ, D0...7, NSP, POE
0.8
V
K03 Vt()hys
Schmitt-Trigger-Hysteresis at Vt()hys = Vt()hi - Vt()lo;
inputs NCS, NWR, NRD, A0...4, D0...7 with input function
NRES, CLK, BLFQ, D0...7, NSP,
POE
150
mV
K04 Vs()hi
Saturation voltage high
an NINT, Dx
Vs()hi = VDD - V( );
I( ) = -4 mA
0.8
V
K05 Vs()lo
Saturation voltage low
an NINT, Dx
I( ) = 4 mA
0.49
V
K06 Ipd()
Pull Down current sources at V() = 1V .. VDD
A0...4, NRES, CLK, BLFQ, D0...7,
POE
2
70
µA
K07 Ipu()
Pull Up current sources at NSP, V() = 0V .. VDD - 1 V
NCS, NWR, NRD
-70
2
µA
K08 tp(POE-IOx)Delay time output enable:
POE to IOx disabled
RL = 240 Ω... 1 kΩ, POE: hi → lo
to V(IOx) < 80 % (VBy - Vs(IOx)hi)
6
µs
K09 tw()lo
Permissible pulse width for en-
able/disable at POE
600
ns
K10 tw()
Permissible burst pulse width at
POE
100
ns
K11 tmin()nres minimum duration for reset at
NRES
200
ns
Frequency BLFQ, CLK
P01 f_CLK
P02 f_BLFQ
frequency at CLK
frequency at BLFQ
1.25 MHz
10
Hz
CHARACTERISTICS: DIAGRAMS
Figure 1: DC load
Figure 2: Pulse load