|
HD66108 Datasheet, PDF (55/60 Pages) Hitachi Semiconductor – (RAM-Provided 165-Channel LCD Driver for Liquid Crystal Dot Matrix Graphics) | |||
|
◁ |
HD66108
DC Characteristics (2) (VCC = 2.7 to 4.0V, GND = 0V, VCCâVEE = 6.0 to 15V, Ta = â20 to +75°C,
unless otherwise noted)
Item
Symbol Min
Typ Max
Unit Test Conditions Notes
Input high
voltage
Input low
voltage
5(6(7
VIH1
The other inputs VIH2
0S, OSC1,
VIL1
CL1, FLM,
TEST1,
TEST2, M
0.85 Ã VCC â VCC + 0.3 V
0.7 Ã VCC â VCC + 0.3 V
â0.3
â 0.3 Ã VCC V
Output high
voltage
The other inputs VIL2
VOH1
â0.3
0.9 Ã VCC
â 0.15 Ã VCC V
ââ
V
âIOH = 50 µA
Output low
voltage
VOL1
â
â 0.1 à VCC V IOL = 50 µA
Input leakage All except
IIIL
current
DB7âDB0,
CL1, FLM, M
â2.5
â 2.5
µA Vin = 0 to VCC
Tri-state
leakage
current
DB7âDB0,
ITSL
â10
CL1, FLM, M
â 10
µA Vin = 0 to VCC
V pins
leakage
current
V1L, V1R,
IVL
â10
V3, V4,
V6L, V6R,
VMHn, VMLn
â 10
µA Vin = VEE to VCC
Current
During display ICC1
â
consumption
ICC2
â
During
ISB
â
standby state
â 260
â 700
â 10
µA External clock 1
fOSC = 500 kHz
µA Internal oscillation 1
Rf = 75 kâ¦
µA
1, 2
ON resistance X0âX164
between
Vi and Xj
RON
â
â 10
k⦠±ILD = 50 µA
3
VCCâVEE = 10V
V pins voltage range
ÃV
â
â 35
%
4
Oscillating frequency
fOSC
315
450 585
kHz Rf = 75 kâ¦
Notes: 1. When voltage applied to input pins is fixed to VCC or to GND and output pins have no load
capacity. Exposing the LSI to light increases current consumption.
2. When the LSI is not exposed to light and Ta = 0 to 40°C with the STBY bit = 1. If using external
clock pulses, input pins must be fixed high or low.
3. ILD indicates the current supplied to one measured pin.
4. ÃV = 0.35 Ã (VCCâVEE). For levels V1, V2, and V3, the voltage supplied should be between the
VCC and the ÃV and for levels V4, V5, and V6, the voltage supplied should be between the VEE
and the ÃV (Figure 36).
1008
|
▷ |