HD66108 Datasheet, PDF (54/60 Pages) Hitachi Semiconductor – (RAM-Provided 165-Channel LCD Driver for Liquid Crystal Dot Matrix Graphics)

HD66108
Item
Symbol Min Typ Max Unit Test Conditions Notes
ON resistance X0–X164
R_ON
between
Vi and Xj
—
—
10
kΩ ±I_LD = 50 µA
3
V_CC–V_EE = 10V
V pins voltage range
ÆV
— — 35 %
4
Oscillating frequency
f_OSC
315 450 585 kHz R_f = 91 kΩ
Notes: 1. When voltage applied to input pins is fixed to V_CC or to GND and output pins have no load
capacity.
2. When the LSI is not exposed to light and Ta = 0 to 40°C with the STBY bit = 1. If using external
clock pulses, input pins must be fixed high or low. Exposing the LSI to light increases current
consumption.
3. I_LD indicates the current supplied to one measured pin.
4. ÆV = 0.35 × (V_CC–V_EE). For levels V1, V2, and V3, the voltage supplied should be between the
V_CC and the ÆV and for levels V4, V5, and V6, the voltage supplied should be between the V_EE
and the ÆV (Figure 36).
5. V_IH4 (min) = 0.7 × V_CC when used under conditions other than V_CC = 5V ±10%.
6. V_IL4 (max) = 0.15 × V_CC when used under conditions other than V_CC = 5V ±10%.
7. V_OH2 (min) = 0.9 × V_CC (–I_OH = 0.1 mA) when used under conditions other than V_CC = 5V ±10%.
8. V_OL2 (max) = 0.1 × V_CC (I_OL = 0.1 mA) when used under conditions other than V_CC = 5V ±10%.
1007