MC9328MXL Datasheet, PDF (9/84 Pages) Freescale Semiconductor, Inc – i.MX Integrated Portable System Processor

Signal Name
SPI2_SS
SPI2_SCLK
TIN
TMR2OUT
USBD_VMO
USBD_VPO
USBD_VM
USBD_VP
USBD_SUSPND
USBD_RCV
USBD_OE
USBD_AFE
SD_CMD
SD_CLK
SD_DAT [3:0]
MS_BS
MS_SDIO
MS_SCLKO
MS_SCLKI
MS_PI0
MS_PI1
UART1_RXD
UART1_TXD
Signals and Connections
Table 3. MC9328MXL Signal Descriptions (Continued)
Function/Notes
SPI2 Slave Select—This signal is multiplexed with a GPI/O pin yet shows up as a primary or
alternative signal in the signal multiplex scheme table. Please refer to the SPI and GPIO chapters in
the MC9328MXL Reference Manual for information about how to bring this signal to the assigned
pin.
SPI2 Serial Clock—This signal is multiplexed with a GPI/O pin yet shows up as a primary or
alternative signal in the signal multiplex scheme table. Please refer to the SPI and GPIO chapters in
the MC9328MXL Reference Manual for information about how to bring this signal to the assigned
pin.
General Purpose Timers
Timer Input Capture or Timer Input Clock—The signal on this input is applied to both timers
simultaneously.
Timer 2 Output
USB Device
USB Minus Output
USB Plus Output
USB Minus Input
USB Plus Input
USB Suspend Output
USB Receive Data
USB OE
USB Analog Front End Enable
Secure Digital Interface
SD Command—If the system designer does not wish to make use of the internal pull-up, via the Pull-
up enable register, a 4.7K–69K external pull up resistor must be added.
MMC Output Clock
Data—If the system designer does not wish to make use of the internal pull-up, via the Pull-up enable
register, a 50K–69K external pull up resistor must be added.
Memory Stick Interface
Memory Stick Bus State (Output)—Serial bus control signal
Memory Stick Serial Data (Input/Output)
Memory Stick Serial Clock (Input)—Serial protocol clock source for SCLK Divider
Memory Stick External Clock (Output)—Test clock input pin for SCLK divider. This pin is only for test
purposes, not for use in application mode.
General purpose Input0—Can be used for Memory Stick Insertion/Extraction detect
General purpose Input1—Can be used for Memory Stick Insertion/Extraction detect
UARTs – IrDA/Auto-Bauding
Receive Data
Transmit Data
MC9328MXL Advance Information, Rev. 5
Freescale Semiconductor
9