MC9S12E64CPVE Datasheet, PDF (113/156 Pages) Freescale Semiconductor, Inc – MC9S12E-Family Device User Guide

Freescale Semicon_Dd_evu_icc_et_Uo_ser_r,_GI_un_idc_e._{— 9S12E128DGV1/D V01.04}
Table A-7 Preliminary 3.3V I/O Characteristics
Conditions are shown in Table A-4 unless otherwise noted
Num C
Rating
Symbol
Min
Typ
Max Unit
P Input High Voltage
1
T Input High Voltage
V_IH
0.65*V_DD5
-
-
V
V_IH
-
- VDD5 + 0.3 V
P Input Low Voltage
2
T Input Low Voltage
3
C Input Hysteresis
Input Leakage Current (pins in high ohmic input
4
P mode)¹
V_in = V_DD5 or V_SS5
V_IL
V_IL
V_HYS
-
-
0.35*V_DD5
V
VSS5 - 0.3 -
-
V
250
mV
I_in
–2.5
-
2.5
µA
Output High Voltage (pins in output mode)
5
C _{Partial Drive IOH = –0.75mA}
V_OH
V_DD5 – 0.4
-
-
V
Output High Voltage (pins in output mode)
6
P _{Full Drive IOH = –4.5mA}
V_OH
V_DD5 – 0.4
-
-
V
Output Low Voltage (pins in output mode)
7
C _{Partial Drive IOL = +0.9mA}
V_OL
-
-
0.4
V
Output Low Voltage (pins in output mode)
8
P _{Full Drive IOL = +5.5mA}
V_OL
-
-
0.4
V
Internal Pull Up Device Current,
9
P _{tested at VIL Max.}
I_PUL
-
-
–60
µA
Internal Pull Up Device Current,
10
C _{tested at VIH Min.}
I_PUH
-6
-
-
µA
Internal Pull Down Device Current,
11
P _{tested at VIH Min.}
Internal Pull Down Device Current,
12
C _{tested at VIL Max.}
I_PDH
-
-
60
µA
I_PDL
6
-
-
µA
13 D Input Capacitance
C_in
6
-
pF
Injection current²
14
T _{Single Pin limit}
I_ICS
-2.5
-
2.5
mA
Total Device Limit. Sum of all injected currents
I_ICP
-25
25
15
P _{Port AD Interrupt Input Pulse filtered}³
t_PIGN
3
µs
16
P _{Port AD Interrupt Input Pulse passed}⁽³⁾
t_PVAL
10
µs
NOTES:
1. Maximum leakage current occurs at maximum operating temperature. Current decreases by approximately one-half for
each 8°C to 12°C in the temperature range from 50°C to 125°C.
2. Refer to Section A.1.4 Current Injection, for more details
3. Parameter only applies in STOP or Pseudo STOP mode.
113
For More Information On This Product,
Go to: www.freescale.com