MC9S12E64CPVE Datasheet, PDF (112/156 Pages) Freescale Semiconductor, Inc – MC9S12E-Family Device User Guide

Device User Guide — 9S12E12^F8^rD^eG^eV1^s/D^cV^a0^l1^e.04^{Semiconductor, Inc.}
Table A-6 5V I/O Characteristics
Conditions are shown in Table A-4 unless otherwise noted
Num C
Rating
Symbol Min
Typ
Max Unit
P Input High Voltage
1
T Input High Voltage
V_IH
0.65*V_DD5
V_IH
-
-
-
V
-
VDD5 + 0.3 V
P Input Low Voltage
2
T Input Low Voltage
V_IL
-
-
0.35*V_DD5
V
V_IL
VSS5 - 0.3
-
-
V
3
C Input Hysteresis
V_HYS
250
mV
Input Leakage Current (pins in high ohmic input
4
P mode)¹
V_in = V_DD5 or V_SS5
I_in
–2.5
-
2.5
µA
Output High Voltage (pins in output mode)
5
C _{Partial Drive IOH = –2mA}
V_OH
V_DD5 – 0.8
-
-
V
6
P
Output High Voltage (pins in output mode)
Full Drive IOH = –10mA
V_OH
V_DD5 – 0.8
-
-
V
7
C
Output Low Voltage (pins in output mode)
Partial Drive IOL = +2mA
V_OL
-
-
0.8
V
Output Low Voltage (pins in output mode)
8
P _{Full Drive IOL = +10mA}
V_OL
-
-
0.8
V
Internal Pull Up Device Current,
9
P _{tested at VIL Max.}
I_PUL
-
-
-130
µA
Internal Pull Up Device Current,
10
C _{tested at VIH Min.}
I_PUH
-10
-
-
µA
Internal Pull Down Device Current,
11
P _{tested at VIH Min.}
I_PDH
-
-
130
µA
Internal Pull Down Device Current,
12
C _{tested at VIL Max.}
13
D Input Capacitance
I_PDL
10
-
C_in
6
-
µA
-
pF
Injection current²
14
T _{Single Pin limit}
I_ICS
-2.5
-
Total Device Limit. Sum of all injected currents
I_ICP
-25
2.5
mA
25
15
P _{Port AD Interrupt Input Pulse filtered}³
t_PIGN
3
µs
16
P _{Port AD Interrupt Input Pulse passed}⁽³⁾
t_PVAL
10
µs
NOTES:
1. Maximum leakage current occurs at maximum operating temperature. Current decreases by approximately one-half for
each 8°C to 12°C in the temperature range from 50°C to 125°C.
2. Refer to Section A.1.4 Current Injection, for more details
3. Parameter only applies in STOP or Pseudo STOP mode.
112
For More Information On This Product,
Go to: www.freescale.com