SED1330F Datasheet, PDF (31/148 Pages) List of Unclassifed Manufacturers – LCD Controller ICs

3.2.1.5
EI
YD
Y driver
X driver
3.0 Command Description
X driver
X driver
X driver
Left Panel
Right Panel
Note: There are no Seiko-Epson LCD units in the configuration shown in Figure 10.
Figure 10. Left-and-right two-panel display
Table 3. LCD parameters
Parameter
IV = 1
W/S = 0
IV = 0
W/S = 1
IV = 1
IV = 0
C/R
C/R
C/R
C/R
C/R
TC/R
TC/R
TC/R (see note 1)
TC/R
TC/R
L/F
L/F
L/F
L/F
L/F
SL1
00H to L/F
00H to L/F + 1
(see note 2)
(L/F) / 2
(L/F) / 2
SL2
00H to L/F
00H to L/F + 1
(see note 2)
(L/F) / 2
(L/F) / 2
SAD1
First screen block First screen block First screen block First screen block
SAD2
Second screen block Second screen block Second screen block Second screen block
SAD3
Third screen block Third screen block Third screen block Third screen block
SAD4
Invalid
Invalid
Fourth screen block Fourth screen block
Cursor move-
ment range
Continuous movement over whole screen
Above-and-below configuration:
continuousmovement over whole screen
Notes:
1. See table 31 (page 105) for further details on setting the C/R and TC/R parameters when using the HDOT SCR command.
2. The value of SL when IV = 0 is equal to the value of SL when IV = 1, plus one.
268-0.4 _{S-MOS Systems, Inc. • 2460 North First Street • San Jose, CA 95131 • Tel: [phone] • Fax: [phone]}