|
SED1330F Datasheet, PDF (128/148 Pages) List of Unclassifed Manufacturers – LCD Controller ICs | |||
|
◁ |
9.0 Application Notes
9.1.3
9.1.3 Display Mode Setting Example 1: Combining Text and Graphics
⢠Conditions
⢠320 à 200 pixels, single-panel drive (1/
200 duty cycle)
⢠First layer: text display
⢠Second layer: graphics display
⢠8 à 8-pixel character font
⢠CG RAM not required
⢠Display memory allocation
⢠First layer (text): 320/8 = 40 characters
per line, 200/8 = 25 lines. Required
memory size = 40 Ã 25 = 1000 bytes.
⢠Second layer (graphics): 320/8 = 40 char-
acters per line, 200/1 = 200 lines. Re-
quired memory size = 40 Ã 200 = 8000
bytes.
03E8H
2nd graphics layer
(8000 bytes)
0000H
1st character layer
(1000 bytes)
2327H
03E7H
Figure 81. Character over graphics layers
⢠Register setup procedure
SYSTEM SET
TC/R calculation
SCROLL
C=
40H
C=
44H
P1 =
30H
P2 =
87H
P3 =
07H
fOSC = 6 MHz
fFR = 70 Hz
P1 =
P2 =
P3 =
00H
00H
C8H
P4 =
27H
P5 =
2FH
(1/6) Ã 9 Ã [TC/R] Ã 200 = 1/70
[TC/R] = 48, so TC/R = 2FH
P4 =
E8H
P5 =
03H
P6 =
P7 =
C7H
28H
P6 =
P7 =
C8H
XH
P8 =
00H
P8 =
XH
P9 =
XH
P10 = XH
128 S-MOS Systems, Inc. ⢠2460 North First Street ⢠San Jose, CA 95131 ⢠Tel: (408) 922-0200 ⢠Fax: (408) 922-0238 268-0.4
|
▷ |